Nissan Altima L32. Instruction — part 1419
TM-20
< ON-VEHICLE REPAIR >
[6MT: RS6F52A]
PARK/NEUTRAL POSITION SWITCH
PARK/NEUTRAL POSITION SWITCH
Removal and Installation
INFOID:0000000004201586
For removal and installation of park/neutral position switch, refer to
.
Inspection
INFOID:0000000004201587
• Check continuity.
Gear position
Continuity
Neutral
Yes
Except neutral
No
SCIA0708E
CONTROL LINKAGE
TM-21
< ON-VEHICLE REPAIR >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CONTROL LINKAGE
Exploded View
INFOID:0000000004201588
Removal and Installation
INFOID:0000000004201589
REMOVAL
1. Shift control lever to the neutral position.
2. Remove the air filter assembly. Refer to
EM-25, "Removal and Installation"
(QR25DE),
3. Remove the shift cable from the shift lever and cable bracket.
4. Remove the select cable from the select lever and cable bracket.
5. Remove the center console. Refer to
IP-18, "Disassembly and Assembly"
.
6. Remove the shift cable from the control device assembly.
7. Remove the select cable from the control device assembly.
8. Remove the bracket covering the retainer grommet.
1.
Control lever knob
2.
Control lever
3.
Control device assembly
4.
Retainer grommet
5.
Select cable
6.
Shift cable
7.
Lock plate
8.
Cable bracket
ALDIA0025GB
TM-22
< ON-VEHICLE REPAIR >
[6MT: RS6F52A]
CONTROL LINKAGE
9. Remove the retainer grommet bolts and retainer grommet.
10. Remove the shift cable and select cable from the vehicle.
11. Remove the control device assembly bolts and the control device assembly.
INSTALLATION
Installation is in the reverse order of removal.
• After assembly, make sure control lever automatically returns to Neutral when it is moved to 1st, 2nd, or
Reverse.
• When control lever is shifted to each position, make sure there is no binding or disconnection at each con-
nection.
Adjustment
INFOID:0000000004201590
SELECT CABLE ADJUSTMENT
1. Remove the select cable eye end (1) from the select lever (2) of
the control device.
2. Slide the lock (A) on the select cable eye end (1) away from the
cable end.
3. Turn the select cable eye end (1) over and push the stopper (B)
to release the adjustment.
4. Install the select cable eye end (1) to the select lever (2) of the
control device
5. Hold the shift lever with the gap between the reverse gate stop-
per and the shifter base at the specified distance (A).
ALDIA0051ZZ
ALDIA0052ZZ
Distance "A"
: 6.3 – 7.0 mm (0.25 – 0.28 in)
ALDIA0053ZZ
CONTROL LINKAGE
TM-23
< ON-VEHICLE REPAIR >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
6. Push the stopper (B) into the cable eye end housing (1).
7. Slide the lock (A) over the stopper (B).
8. Check for smooth gear select operation.
ALDIA0054ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст