Hyundai Santa Fe (2006 year). Manual — part 320
EM -82
ENGINE (D4EB - DIESEL 2.2)
INTAKE AND EXHAUST
SYSTEM
COMPONENTS
E86FAACF
INTAKE MANIFOLD
NOTE
• Use new gashet when reassembly.
• Check for folds or scratches on the surface of the gashet.
• Replace sith a new gasket if damagcd.
TORQUE : N.m (kgf.m, lb-ft)
20~25
(2.0~3.5, 15~18)
1
2
3
4
5
6
7
15~22 (1.5~2.2, 11~16)
10~12 (1.0~1.2,7~9)
8~10 (8~1.0, 6~7)
1. Throttle body
2. Intake manifold
3. Intake manifold gasket
4. Swirl valve actuator
5. Thermostat
6. Thermostat gasket
7. Thermostat housing
SCMM16017L
INTAKE AND EXHAUST SYSTEM
EM -83
EXHAUST MANIFOLD
TORQUE : N.m (kgf.m, lb-ft)
20~27
(2.0~2.7, 15~20)
20~27 (2.0~2.7, 15~20)
NOTE
• Use new gashet and self-locking
nut when assembly.
• Check for folds or scratches
on the surface of the gashet.
• Replace with a new gasket if
damaged.
1
1
2
3
4
5
6
7
8
9
10
10
11
8~12
(8~1.2, 6~9)
17~22 (1.7~2.2, 12~16)
30~35 (3.0~3.5, 22~26)
35~45
(3.5~4.5, 26~33)
8~10
(8~1.0, 6~7)
17~22 (1.7~2.2, 12~16)
25~38
(2.5~3.8, 18~28)
25~30
(2.5~3.0, 19~22)
25~38
(2.5~3.8, 18~28)
1. Heat protector
2. Turbo charger discharge pipe
3. Turbo charger assembly
4. Turbo charger support bracket
5. Turbo charger oil drain pipe
6. Exhaust manifold
7. EGR elbow
8. Exhaust manifold gasket
9. EGR valve and cooler assembly
10. EGR valve and cooler assembly gasket
11. Oil separator assembly
SCMM16018L
EM -84
ENGINE (D4EB - DIESEL 2.2)
MUFFLER
40~55(4 ~ 5.5, 30~39.8)
1. Front muffler
2. CPF(Catalyzed Particulate Filter)
3. Center muffler
4. Main muffler
5. Gasket
6. Rubber hanger
TORQUE : N.m (kgf.m, lb-ft)
40~60 (4.0~6.0, 30~43)
40~60 (4.0~6.0, 30~43)
40~60 (4.0~6.0, 30~43)
SCMM16019L
INTAKE AND EXHAUST SYSTEM
EM -85
REMOVAL
E4B0222C
INTAKE MANIFOLD
1.
Remove the alternator. (See EE group - alternator)
2.
Remove the intercooler hose.
3.
Remove the engine coolant bleed hose.
4.
Remove the radiator upper hose.
5.
Disconnect the engine wire harness connectors from
intake manifold side.
6.
Remove the oil level gauge(A).
A
LCIG016A
7.
Remove the common rail(A).(See FL group)
A
LCIG017A
8.
Remove the thermostat housing(A).
Tightening torque :
20 ~ 25N.m (2.0 ~ 2.5kgf.m, 15 ~ 18lb-ft)
A
LCIG018A
9.
Remove the EGR throttle body(A).
Tightening torque :
10 ~ 12N.m (1.0 ~ 1.2kgf.m, 7 ~ 9lb-ft)
A
LCIG019A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст