Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1843
INSTALLATION
1. Install the roll top shroud (1) over the steering col-
umn (2).
2. Install the four (three for column shift column)
shroud mounting screws (2).
19 - 190
COLUMN SERVICE INFORMATION
LX
3. Manual tilt and telescoping columns – Position the
manual adjustment handle (2) over the column
adjustment pin and rotate the locking tab (3) rear-
ward as shown latching the handle to the column.
Make sure the tab snaps into locked position.
4. Install the cluster bezel (3). (Refer to 23 - BODY/
INSTRUMENT
PANEL/CLUSTER
BEZEL
-
INSTALLATION)
5. Install the steering column opening reinforcement
(1).
LX
COLUMN SERVICE INFORMATION
19 - 191
6. Install the steering column opening cover (1).
7. Install the SCCM (1) onto the steering column.
19 - 192
COLUMN SERVICE INFORMATION
LX
8. Tighten the set screw (1) securing the SCCM (2).
9. Tighten clockspring screws (1) that were backed
out to keep the clockspring from unwinding (Refer
to 8 - ELECTRICAL/RESTRAINTS/CLOCKSPRING
- REMOVAL).
10. Align the spline on the steering wheel hub to the
column shaft, then install the steering wheel (1).
11. Install a NEW retainer bolt (2). Tighten the bolt to
70 N·m (52 ft. lbs.).
LX
COLUMN SERVICE INFORMATION
19 - 193
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст