Chrysler Town & Country/Voyager, Dodge Caravan, Plymouth Voyager. Manual — part 119
CHILD SEAT MODULE HEAD RESTRAINT
REMOVAL (FIG. 29)
(1) Remove child restraint seat module from seat
back.
(2) Remove screws holding head restraint hinge to
module.
(3) Separate head restraint from module.
INSTALLATION
Reverse the preceding operation.
CHILD SEAT MODULE HEAD RESTRAINT COVER
AND PAD
REMOVAL
(1) Remove trim panel from rear of seat back.
(2) Disengage J-strip retainer holding head re-
straint trim cover to seat back frame.
(3) Open head restraint to the highest position.
(4) Disengage hook and loop closure at bottom of
head restraint.
(5) Turn head restraint cover inside-out from bottom
of cover up.
(6) Separate cover from head restraint armature
and pad.
(7) Separate pad from armature.
INSTALLATION
Reverse the preceding operation.
CHILD SEAT MODULE CUSHION COVER AND PAD
REMOVAL
(1) Remove child seat module.
(2) Remove bolts holding child seat cushion and
restraint belts to module pivots (Fig. 30).
(3) Disengage push-in fasteners holding trim cover
to cushion pan (Fig. 31).
(4) Separate trim cover from cushion pad and pan.
(5) Separate pad from pan.
INSTALLATION
Reverse the preceding operation.
Fig. 28 Child Seat Module
Fig. 29 Child Restraint Head Restraint
Fig. 30 Child Seat Cushion Pivot Bolts
.
BODY
23 - 15
CHILD SEAT BACK COVER AND PADS
REMOVAL
(1) Remove seat from vehicle.
(2) Remove risers from bottom of seat.
(3) Remove child seat modules.
(4) Remove outboard arm rest and pivot bracket.
(5) Remove hog-rings holding lower rear corners of
seat back cover to cushion frame (Fig. 32).
(6) Disengage J-strips holding seat back cover to
bottom of cushion frame (Fig. 33).
(7) Disengage J-strips holding seat back cover to
seat back frame retaining wires.
(8) Remove hog-rings holding cover to outboard seat
back frame retaining wires.
(9) Separate cover from pads and frame (Fig. 34).
(10) Remove hog-rings holding pads to seat back
frame.
(11) Separate pads from frame.
(12) Remove screws holding upper insulator cap to
seat back frame.
(13) Separate insulator cap from frame.
INSTALLATION
Reverse the preceding operation.
CHILD SEAT CUSHION COVER AND PAD
REMOVAL
(1) Remove seat from vehicle.
(2) Remove risers from bottom of seat.
(3) Remove bolts holding seat belt buckles to cushion
frame.
(4) Separate seat belts from cushion.
(5) Disengage J-strips holding seat back cover to
bottom of cushion frame.
(6) Remove hog-rings holding lower rear corners of
seat back cover to cushion frame.
(7) Disengage J-strips holding cushion cover and
pad to seat frame.
(8) Separate cover and pad from seat frame.
Fig. 31 Child Seat Cushion Cover
Fig. 32 Seat Back Cover Hog-rings
Fig. 33 Seat Back Cover J-strip
Fig. 34 Seat Back Cover and Pads
23 - 16
BODY
.
CHILD SEAT CUSHION COVER AND PAD IN-
STALLATION
Reverse the preceding operation.
CONVERTA-BED SEATS
The optional Converta-bed seats are removed from
the vehicle using the same procedure as the two and
three passenger bench seats. Refer to the Owner’s
Manual provided with the vehicle for proper removal
procedure.
CONVERTA-BED SEAT RISER
REMOVAL (FIG. 35)
(1) Remove seat from vehicle.
(2) Remove seat track, if equipped.
(3) Remove bolts holding seat track to rear frame
rail.
(4) Remove bolts holding seat track to forward pivot
bracket and rail.
(5) Separate riser from seat.
INSTALLATION
Reverse the preceding operation.
CONVERTA-BED FORWARD RAIL AND PIVOT
REMOVAL (FIG. 36)
(1) Remove seat from vehicle.
(2) Remove seat track, if equipped.
(3) Remove bolts holding seat track to rear frame
rail.
(4) Remove bolts holding seat track to forward pivot
bracket and rail.
(5) Separate riser from seat.
(6) Separate forward rail from pivot bracket.
(7) Remove shoulder bolt holding pivot bracket from
cushion frame.
(8) Separate pivot bracket from seat.
INSTALLATION
Reverse the preceding operation.
CONVERTA-BED SEAT HINGE COVERS.
REMOVAL
(1) If necessary, Remove seat from vehicle.
(2) Remove screw holding upper hinge cover to seat
back hinge.
(3) Separate upper hinge cover from seat (Fig. 37).
(4) Remove screw holding lower hinge cover to seat
back hinge.
(5) Separate lower hinge cover from seat (Fig. 38).
INSTALLATION
Reverse the preceding operation.
Fig. 35 Converta-bed Riser
Fig. 36 Forward Rail and Pivot
Fig. 37 Upper Hinge Cover
.
BODY
23 - 17
CONVERTA-BED LATCH HANDLE AND LINK BAR
REMOVAL
(1) Remove seat from vehicle.
(2) Remove upper and lower seat back hinge covers.
(3) Remove risers from seat cushion frame.
(4) Remove push-nut holding latch handle to right
seat back hinge (Fig. 39).
(5) Disengage seat back latch return spring from
right hinge (Fig. 39).
(6) Loosen bolts holding right seat back hinge to
cushion frame (Fig. 40).
(7) Separate latch handle and link bar from cushion
frame.
INSTALLATION
Reverse the preceding operation.
CONVERTA-BED SEAT BACK HINGE
REMOVAL
(1) Remove seat from vehicle.
(2) Remove upper and lower seat back hinge covers.
(3) If removing right hinge, remove push-nut hold-
ing latch handle to right seat back hinge. Disengage
seat back latch return spring from right hinge (Fig. 39).
(4) Disengage interlocking J-strips holding carpet
cover together below rear rail (Fig. 41).
(5) Remove bolts holding seat back hinge and spacer
to rear rail (Fig. 42).
(6) Remove nuts holding seat back hinge to back
frame.
(7) Remove bolts holding seat back hinge to cushion
frame.
(8) Separate seat back hinge from seat.
INSTALLATION
Reverse the preceding operation.
CONVERTA-BED SEAT BACK FRAME
REMOVAL
(1) Remove seat from vehicle.
(2) Remove upper and lower seat back hinge covers.
(3) On three passenger seat, disengage hook and
channel retainer holding seat back lower apron to the
rear rail cover (Fig. 43).
(4) Disengage interlocking J-strips holding carpet
cover together below rear rail.
(5) Remove bolts holding left seat back hinge and
spacer to rear rail.
(6) Remove nuts holding seat back hinges to seat
back frame.
Fig. 38 Lower Hinge Cover
Fig. 39 Push-nut and Return Spring
Fig. 40 Latch Handle, Link Bar and Return Spring
23 - 18
BODY
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст