SsangYong Korando II (1996-2006 year). Manual — part 39
1E1 -- 2 M162 ENGINE ELECTRICAL
DAEWOO MY_2000
SPECIFICATIONS
GENERATOR SPECIFICATIONS
Application
Description
Current
115 A
Output Voltage
12 -- 14 v
Resistance Between Rotor Core and Slip Ring
∞ Ω
STARTER SPECIFICATIONS
Application
Description
Output Power
1.8 kw
Voltage
12 v
BATTERY SPECIFICATIONS
Application
Description
Capacity
90 AH
Max. Tolerance Between Cells
≥ 0.04
Specific Gravity
≥ 1.24
FASTER TIGHTENING SPECIFICATIONS
Application
NSm
Lb-Ft
Lb-In
Generator Terminal B+Nut
14 -- 18
10 -- 13
--
Generator Terminal D+Nut
4 -- 5
--
35 -- 44
Generator Mounting Bolt
25
18
--
Battery Cable Nut on Starting Motor
12 -- 15
9 -- 11
--
Electric Wire Nut on Starting Motor
6 -- 7
--
53 -- 62
Starting Motor Mounting Bolt
35 -- 48
26 -- 35
--
Battery Mounting Bracket Nut
12 -- 18
9 -- 13
--
Battery Negative Cable
12 -- 18
9 -- 13
--
Battery Positive Cable
12 -- 18
9 -- 13
--
Spark Plug Cover Bolt
9 -- 11
--
80 -- 97
Ignition Cable Bolt
9 -- 11
--
80 -- 97
Spark plug
20 -- 30
15 -- 22
--
M162 ENGINE ELECTRICAL 1E1 -- 3
DAEWOO MY_2000
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
GENERATOR
Preceding Work : Removal of the drivebelt
Removal & Installation Procedure
1. Disconnect the negative battery terminal.
2. Unscrew the nut and disconnect the terminal (1).
Installation Notice
Tightening Torque
14 -- 18 NSm (10 -- 13 lb-ft)
3. Unscrew the nut and disconnect the terminal (2).
Installation Notice
Tightening Torque
4 -- 5 NSm (35 -- 44 lb-in)
1 Terminal (B+)
2 Terminal (D+)
4. Unscrew the generator mounting bolt (3).
Installation Notice
Tightening Torque
25 NSm (18 lb-ft)
5. Remove the generator.
6. Installation should follow the removal procedure in
the reverse order.
3 Generator Mounting Bolt
4 Generator
1E1 -- 4 M162 ENGINE ELECTRICAL
DAEWOO MY_2000
STARTING MOTOR
Removal & Installation Procedure
1. Disconnect the ground cable.
2. Unscrew the nut and disconnect the battery cable(1).
Installation Notice
Tightening Torque
12 -- 15 NSm (9 -- 11 lb-ft)
3. Unscrew the nut and disconnect the engine electric
wire (2).
Installation Notice
Tightening Torque
6 -- 7 NSm (53 -- 62 lb-in)
1 Battery Cable
2 Engine Electric Wire
4. Unscrew the mounting bolts (3) of starting motor.
Installation Notice
Tightening Torque
35 -- 48 NSm (26 -- 35 lb-ft)
5. Remove the starting motor.
6. Installation should follow the removal procedure in
the reverse order.
3 Fixing Bolt
4 Starting Motor
M162 ENGINE ELECTRICAL 1E1 -- 5
DAEWOO MY_2000
BATTERY
1 Cable Terminal (--)
2 Cable Terminal Cap (--)
3 Cable Terminal Cap (+)
4 Nut
5 Fuseblink Box
6 Terminal (+)
7 Battery holddown Bracket
8 Battery Clamp Bolt
9 Battery
10 Sub Tray
11 Battery Tray
Removal & Installation Procedure
Notice
D
Disconnect the battery negative cable first.
D
Insert the clamp bolt (8) into the battery tray hole (11)
from inside when installing.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст