SsangYong Korando II (1996-2006 year). Manual — part 132
M161 ENGINE INTAKE & EXHAUST 1G2 -- 3
DAEWOO MY_2000
MAINTENANCE AND REPAIR
ON--VEHICLE SERVICE
AIR CLEANER
1 Air Cleaner Assembly
2 Element Assembly
3 Insulator
4 Air Duct Hose
6 Bolt (M8 x 30 )
22.5--27.5 NSm
. . . . . . . . . . . . . . .
1G2 -- 4 M161 ENGINE INTAKE & EXHAUST
DAEWOO MY_2000
Removal and Installation Procedure
1. Disconnect the HFM sensor and the air cleaner by
prying up the clamp.
2. Remove the air cleaner mounting bolt.
Installation Notice
Tightening Torque
22.5 -- 27.5 NSm
(16.6 -- 20.3 lb-ft)
3. Remove air intake shield upper cover, and then re-
move the air cleaner from rubber bearing on bracket.
Notice: For installation, exactly seat the air cleaner into
the rubber bearing.
M161 ENGINE INTAKE & EXHAUST 1G2 -- 5
DAEWOO MY_2000
AIR INTAKE SHIELD
Preceding Work: Removal of air cleaner
1 Air Cleaner Assembly
3 Insulator
4 Air Duct Hose
5 Air Inlet Duct
7 Bolt (M6 x 35 )
9--11 NSm
. . . . . . . . . . . . . . . . . . .
Removal & Installation Procedure
1. Remove the upper cover (3) from the air intake shield
(5) upper mounting pin.
2. Remove the bolts (4 and 6).
3. Remove the air intake shield (5).
4. Installation should follow the removal procedure in
the reverse order.
1G2 -- 6 M161 ENGINE INTAKE & EXHAUST
DAEWOO MY_2000
INTAKE AIR DUCT
1 Clamp
2 Sleeve
3 HFM Sensor
4 Intake Air Duct
5 Blow--by Hose
7 Clamp(2 pieces)
8 Intake Air Duct Mounting Bracket
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст