Nissan Qashqai J11. Manual — part 407
ECK-188
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
P0089 FUEL PRESSURE
Check the correctness of the fuel filter.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace fuel filter.
4.
CHECK FUEL RAIL PRESSURE SENSOR CONNECTION
1.
Turn ignition switch OFF.
2.
Check fuel rail pressure sensor harness connector connection.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace error-detected parts.
5.
CHECK HIGH PRESSURE FUEL PUMP HARNESS CONNECTOR CONNECTION
Check High pressure fuel pump harness connector connection.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace error-detected parts.
6.
CHECK ECM HARNESS CONNECTOR CONNECTION
Check ECM harness connector connection.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace ECM harness connector connection.
7.
CHECK HIGH PRESSURE FUEL PUMP CIRCUIT FOR OPEN AND SHORT
Check high pressure fuel pump circuit for open and short.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair or replace error-detected parts.
8.
CHECK FUEL FLOW ACTUATOR
Check high pressure fuel pump. Refer to
ECK-189, "Component Inspection (High Pressure Fuel Pump)"
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> Replace error-detected parts.
9.
CHECK FUEL RAIL PRESSURE SENSOR CIRCUIT FOR OPEN AND SHORT
Check fuel rail pressure sensor circuit for open and short.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> Repair or replace error-detected parts.
+
-
Continuity
ECM
High pressure fuel pump
Connector
Terminal
Connector
Terminal
F80
92
F133
2
Existed
+
-
Continuity
ECM
Fuel rail pressure sensor
Connector
Terminal
Connector
Terminal
F80
45
F40
3
Existed
68
2
72
1
P0089 FUEL PRESSURE
ECK-189
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
10.
CHECK FOR FUEL LEAK
Check for fuel leakage at fuel circuit.
Is the inspection result normal?
YES
>> GO TO 11.
NO
>> Repair or replace malfunctioning parts.
11.
CHECK FUEL INJECTOR
Check fuel injector. Refer to
ECK-211, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 12.
NO
>> Replace error-detected parts.
12.
CHECK ENGINE COOLANT TEMPERATURE SENSOR
Check engine coolant temperature sensor. Refer to
ECK-201, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Replace error-detected parts.
Component Inspection (High Pressure Fuel Pump)
INFOID:0000000010289759
1.
CHECK HIGH PRESSURE FUEL PUMP
1.
Disconnect high pressure fuel pump harness connector.
2.
Check the resistance between high pressure fuel pump terminals as follows.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace high pressure fuel pump.
Component Inspection (Fuel Injector)
INFOID:0000000010289760
1.
CHECK FUEL INJECTOR
1.
Turn ignition switch OFF.
2.
Disconnect fuel injector harness connector.
3.
Check the resistance between fuel injector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace fuel injector.
High pressure fuel pump
Condition
Resistance
+
-
Terminal
1
2
Temperature
°
C (
°
F)
20 (68)
2.55 - 2.81
Ω
Fuel injector
Condition
Resistance
+
−
Terminal
1
2
Temperature: 20
°
C (68
°
F)
150 – 250k
Ω
ECK-190
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
P0095 IAT SENSOR 2
P0095 IAT SENSOR 2
DTC Logic
INFOID:0000000010289761
DTC DETECTION LOGIC
NOTE:
• If DTC P0095 is displayed with DTC P1489, perform the trouble diagnosis for DTC P1489. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DIAGNOSIS PROCEDURE
NOTE:
DTC P0095 can not duplicate.
>> Proceed to
ECK-190, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010289762
1.
CHECK ECM HARNESS CONNECTOR CONNECTION
1.
Turn ignition switch OFF.
2.
Check ECM harness connector connection.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK INTAKE AIR TEMPERATURE SENSOR 2 HARNESS CONNECTOR CONNECTION
1.
Turn ignition switch OFF.
2.
Check turbocharger boost sensor (with intake air temperature sensor 2) harness connector connection
F5.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts.
3.
CHECK INTAKE AIR TEMPERATURE SENSOR 2
ECK-191, "Component Inspection (Intake Air Temperature Sensor 2)"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace error-detected parts.
4.
CHECK INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT FOR OPEN AND SHORT
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0095
AIR TEMP SEN/CIRC
(Intake air temperature sen-
sor 2 circuit bank 1)
• 1.DEF: VOLTAGE TOO
LOW
• 2.DEF: VOLTAGE TOO
HIGH
• 3.DEF: IMPLAUSIBLE
SIGNAL
• 4.DEF: SIGNAL INCO-
HERENCE
• 5.DEF: IMPROPER SIG-
NAL SHAPE
• 6.DEF: NO SIGNAL SPE-
CIFIC SUBTYPE
• Signal voltage from the intake air
temperature sensor 2 remains 4.9 V
or more for 1 second or more.
• An excessively low voltage from the
intake air temperature sensor 2 is
sent to ECM.
• ECM detects improper signal.
• Harness or connectors
(Intake air temperature sensor 2 circuit is
open or shorted.
• Intake air temperature sensor 2
• ECM
P0095 IAT SENSOR 2
ECK-191
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
Check intake air temperature sensor 2 circuit for open and short.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace error-detected parts.
5.
CHECK EGR TEMPERATURE SENSOR
ECK-191, "Component Inspection (Low Pressure EGR Temperature Sensor)"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Replace error-detected parts.
Component Inspection (Intake Air Temperature Sensor 2)
INFOID:0000000010289763
1.
CHECK INTAKE AIR TEMPERATURE SENSOR 2
1.
Disconnect turbocharger boost sensor (with intake air temperature sensor 2) harness connector.
2.
Check resistance between turbocharger boost sensor (with intake air temperature sensor 2) harness con-
nector terminals under the following conditions.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace turbocharger boost sensor (with intake air temperature sensor 2).
Component Inspection (Low Pressure EGR Temperature Sensor)
INFOID:0000000010289764
1.
CHECK LOW PRESSURE EGR TEMPERATURE SENSOR
1.
Disconnect low pressure EGR volume control valve upstream temperature sensor harness connector.
2.
Check resistance between low pressure EGR volume control valve upstream temperature sensor termi-
nals under the following conditions.
+
-
Continuity
ECM
Turbocharger boost sensor
(with Intake air temperature
sensor 2)
Connector
Terminal
Connector
Terminal
F81
102
F5
1
Existed
145
2
Turbocharger boost sensor
(with intake air temperature sensor 2)
Condition
Resistance
+
-
Terminals
2
1
Temperature
°
C (
°
F)
−
10 (14)
9.395 – 9.775
10 (50)
3.791 – 3.927
20 (68)
2.416 – 2.583
30 (86)
1.706 – 1.760
50 (122)
0.833 – 0.857
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст