Nissan Qashqai J11. Manual — part 1801
WW-82
< REMOVAL AND INSTALLATION >
FRONT WASHER
FRONT WASHER
Exploded View
INFOID:0000000010479833
Washer nozzle
Washer tube
Check valve
Washer tube
Washer tube
Straight connector
Washer tube
Washer pump
Packing
Washer tank
Washer tank packing
Washer tank inlet
Washer tank cap
: Vehicle front
JMLIA5161ZZ
FRONT WASHER
WW-83
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Hydraulic Layout
INFOID:0000000010479834
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000010491780
REMOVAL
1.
Open the hood.
2.
Remove front washer nozzle with a small flat-bladed screwdriver
in according to numerical order 1
→
2 indicated by arrows as
shown in the figure.
3.
Remove the front washer tube from the front washer nozzle.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Washer nozzle
Washer tube
Washer tank
: Fixing point
JMLIA5162ZZ
: Vehicle front
JPLIA0274ZZ
WW-84
< REMOVAL AND INSTALLATION >
FRONT WASHER
• After installation, check that there is no leakage at operated washer.
• After installation, check that spray position. Refer to
WW-84, "WASHER NOZZLE : Inspection"
WASHER NOZZLE : Inspection
INFOID:0000000010491781
WASHER NOZZLE SPRAY POSITION INSPECTION
Check spray positions to match the positions shown in the figure.
CAUTION:
Can not adjust splay position.
Replace the washer nozzle, when the splay position is out of the
figure.
WASHER TUBE
WASHER TUBE : Removal and Installation
INFOID:0000000010479864
CAUTION:
When the washer tube is removed, washer fluid may come out so prepare a container to receive the
fluid and never allow fluid to be sprinkled.
REMOVAL
1.
Remove cowl top cover. Refer to
EXT-29, "Removal and Installation"
.
2.
Remove front fender protector. Refer to
EXT-32, "Removal and Installation"
.
3.
Pull out washer tube from washer pump.
4.
Disengage washer tube fixing clip, and then remove washer tube.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check that there is no leakage at operated washer.
WASHER TUBE : Inspection
INFOID:0000000010499382
CHECK VALVE INSPECTION
Check that air can pass through the hose by blowing forward [toward
the nozzle, and check that air cannot pass through by sucking
[toward the washer tank].
WASHER TANK
: Upper allowable limit of aiming.
: Aiming target.
: Lower allowable limit of aiming.
: Approx outer edge of fan.
: Edge of black coating.
A
: 540 mm (21.3 in)
B
: 110 mm (4.33 in)
C
: 220 mm (8.66 in)
D
: 630 mm (24.8 in)
JMLIA5254ZZ
JPLIA0275ZZ
FRONT WASHER
WW-85
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER TANK : Removal and Installation
INFOID:0000000010479837
REMOVAL
CAUTION:
When the washer tank inlet and washer tube is removed, washer fluid may come out so prepare a con-
tainer to receive the fluid and never allow fluid to be sprinkled.
1.
Remove front bumper fascia assembly. Refer to
EXT-19, "Removal and Installation"
.
2.
Remove front fender protector. Refer to
EXT-32, "Removal and Installation"
.
3.
Remove washer tank inlet.
a.
Remove washer tank inlet fixing clip.
b.
Pull out washer tank inlet from washer tank.
4.
Pull out washer tube from washer pump.
5.
Disconnect washer pump harness connector.
6.
Disengage harness clips, and then remove harness form washer tank.
7.
Remove washer tank fixing bolts and nut, and then remove washer tank.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Add washer liquid up to the top of the washer tank inlet after installing. Check that there is no leak-
age.
• After installation, check that there is no leakage at operated washer.
WASHER PUMP
WASHER PUMP : Removal and Installation
INFOID:0000000010479838
REMOVAL
CAUTION:
When the washer tube and washer pump is removed, washer fluid may come out so prepare a con-
tainer to receive the fluid and never allow fluid to be sprinkled.
1.
Remove front fender protector. Refer to
EXT-32, "Removal and Installation"
.
2.
Pull out washer tube from washer pump.
3.
Disconnect washer pump harness connector, pull out washer pump, and then remove washer pump.
4.
Remove packing.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Check that packing is inserted fully. (This may be the cause of washer fluid leakage and washer
pump looseness.)
• Add washer liquid up to the top of the washer tank inlet after installing. Check that there is no leak-
age.
• After installation, check that there is no leakage at operated washer.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст