Nissan Qashqai J11. Manual — part 1802
WW-86
< REMOVAL AND INSTALLATION >
REAR WASHER
REAR WASHER
Exploded View
INFOID:0000000010479856
Washer tube
Grommet
Check valve
Washer tube
Grommet
Washer pump
Packing
Washer tank
Washer tank packing
Washer tank inlet
Washer tank cap
Rear washer nozzle
Washer tube
Tube connector
Grommet
Washer tube
Tube connector
Washer tube
: To solenoid valve
: Vehicle front
JMLIA5163ZZ
REAR WASHER
WW-87
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Hydraulic Layout
INFOID:0000000010479857
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000010479858
REMOVAL
CAUTION:
When the washer tube is removed, washer fluid may come out so prepare a container to receive the
fluid and never allow fluid to be sprinkled.
1.
Disengage rear washer nozzle fixing pawl, using a remover tool to notch of rear washer nozzle.
2.
Pull out washer tube form rear washer nozzle, and then remove rear washer nozzle.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
• Can not adjust splay position.
• After installation, check that there is no leakage at operated washer.
WASHER TUBE
WASHER TUBE : Removal and Installation
INFOID:0000000010479863
CAUTION:
When the washer tube is removed, washer fluid may come out so prepare a container to receive the
fluid and never allow fluid to be sprinkled.
REMOVAL
1.
Remove instrument panel, and then remove insulator. Refer to
IP-13, "Removal and Installation"
.
Rear washer nozzle
Grommet
Grommet
Washer tube
Grommet
Washer tank
: Fixing point
JMLIA5164ZZ
WW-88
< REMOVAL AND INSTALLATION >
REAR WASHER
2.
Remove dash side finisher and center pillar lower garnish. Refer to
INT-18, "Removal and Installation"
.
3.
Remove luggage side lower finisher (front). Refer to
4.
Remove head lining. Refer to
INT-25, "Removal and Installation"
.
5.
Remove back door trim finisher upper. Refer to
INT-31, "Removal and Installation"
6.
Remove front fender protector. Refer to
EXT-32, "Removal and Installation"
.
7.
Remove rear washer nozzle. Refer to
WW-87, "WASHER NOZZLE : Removal and Installation"
8.
Pull out washer tube from washer pump.
9.
Disengage washer tube fixing clips, and then remove washer tube.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check that there is no leakage at operated washer.
WASHER TUBE : Inspection
INFOID:0000000010499372
CHECK VALVE INSPECTION
Check that air can pass through by blowing forward direction [toward
the washer nozzle], and check that air cannot pass through by suck-
ing reverse direction [toward washer tank].
JMLIA4606ZZ
HEADLAMP WASHER
WW-89
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
HEADLAMP WASHER
Exploded View
INFOID:0000000010479840
Front bumper fascia assembly
Headlamp washer cover
Headlamp washer bracket
Headlamp washer nozzle
Headlamp washer tube
Washer tank
Headlamp washer pump
Headlamp washer tube
Connector
Headlamp washer tube
JMLIA5165ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст