Nissan Versa Sedan. Manual — part 521
BODY SIDE TRIM
INT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
CENTER PILLAR LOWER FINISHER : Removal and Installation
INFOID:0000000009269475
REMOVAL
1. Remove front kicking plate and rear kicking plate. Refer to
INT-20, "KICKING PLATE INNER : Removal
2. Remove center pillar lower finisher as shown.
INSTALLATION
Installation is in the reverse order of removal.
CENTER PILLAR UPPER FINISHER
CENTER PILLAR UPPER FINISHER : Removal and Installation
INFOID:0000000009269476
REMOVAL
1. Remove front shoulder anchor. Refer to
SB-6, "SEAT BELT RETRACTOR : Removal and Installation"
2. Remove front body side welt and rear body side welt. Refer to
INT-22, "BODY SIDE WELT : Removal and
.
3. Release center pillar upper finisher upper pawl using a suitable tool as shown.
WARNING:
Do not reuse center pillar upper finisher if removed.
CAUTION:
When releasing molded in pawls, follow the steps as shown to prevent finisher or clip damage.
4. Release center pillar upper finisher lower pawl using a suitable
tool (A) and remove center pillar upper finisher.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
JMJIA6045ZZ
PIIB2600J
AWJIA0732ZZ
INT-24
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
When installing center pillar upper finisher, make sure that pawls and are securely pressed into the
body panel holes.
REAR PILLAR FINISHER
REAR PILLAR FINISHER : Removal and Installation
INFOID:0000000009269477
REMOVAL
1. Partially remove rear body side welt. Refer to
INT-22, "BODY SIDE WELT : Removal and Installation"
2. Remove rear seat cushion. Refer to
SE-23, "Removal and Installation - Seat Cushion Assembly"
.
3. Remove the rear seat bolster. Refer to
SE-24, "Removal and Installation - Rear Seat Bolster"
4. Release rear pillar finisher clips and metal clips using a suitable
tool (A) and remove rear pillar finisher by pulling outward.
: Clip
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing rear pillar finisher, make sure that clips and metal clips are securely pressed in body
holes.
AWJIA0733ZZ
REAR PARCEL SHELF FINISHER
INT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR PARCEL SHELF FINISHER
Exploded View
INFOID:0000000009269478
Removal and Installation
INFOID:0000000009269479
REMOVAL
1. Remove high-mounted stop lamp. Refer to
EXL-112, "Removal and Installation"
2. Remove rear pillar finisher. Refer to
INT-24, "REAR PILLAR FINISHER : Removal and Installation"
3. Remove rear seat belt floor anchor bolts. Refer to
SB-9, "SEAT BELT RETRACTOR : Removal and Instal-
.
4. Release seat belt finisher pawls using a suitable tool (A) and
remove seat belt finisher.
: Pawl
1.
High-mounted stop lamp
2.
Rear parcel shelf finisher
3.
Seat belt finisher
4.
Seatback latch cover
5.
Top tether strap anchor
6.
Top tether strap anchor finisher
Front
Pawl
AWJIA0734ZZ
AWJIA0735ZZ
INT-26
< REMOVAL AND INSTALLATION >
REAR PARCEL SHELF FINISHER
5. Fold rear seatbacks down (60:40 split seatback) or remove fixed seatback. Refer to
Installation - Fixed Seatback"
6. Remove seatback latch cover clips and seatback latch cover.
7. Remove rear parcel shelf finisher clips (A).
8. Pull rear parcel shelf finisher toward front and remove rear par-
cel shelf finisher.
: Front
9. Release anchor finisher pawls and remove anchor finishers and anchors from rear parcel shelf finisher (if
necessary).
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6078ZZ
JMJIA6079ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст