Nissan Pathfinder. Manual — part 386
DLK-310
< REMOVAL AND INSTALLATION >
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000009175905
Removal and Installation
INFOID:0000000009175906
REMOVAL
NOTE:
When fuel filler lid lock actuator (1) is not functioning correctly, pull
the rod from inside the vehicle to open fuel filler lid.
1.
Fuel filler lid bumper rubber
2.
Fuel filler lid
3.
Fuel filler lid lock actuator
4.
Fuel filler lid lock
AWKIA2618ZZ
JMKIA1960ZZ
FUEL FILLER LID OPENER
DLK-311
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1. Remove fuel cap pin (1).
2. Remove bolts (2) and fuel filler lid (1).
3. Remove luggage side lower finisher (LH). Refer to
INT-31, "LUGGAGE SIDE LOWER FINISHER :
.
4. Rotate lock nut counterclockwise and remove.
5. Remove fuel filler lid lock actuator by releasing the pawl.
6. Disconnect harness connector from fuel filler lid lock actuator.
7. Remove fuel filler lid lock by releasing the pawls.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installation, check fuel filler lid open/close, lock/unlock operation.
• After installation, apply touch-up paint (body color) to the head of fuel filler lid bolts.
JMKIA5270ZZ
ALKIA2883ZZ
DLK-312
< REMOVAL AND INSTALLATION >
KEY CYLINDER
KEY CYLINDER
GLOVE BOX LID KEY CYLINDER
GLOVE BOX LID KEY CYLINDER : Removal and Installation
INFOID:0000000009175907
REMOVAL
1. Remove glove box assembly (1) to access glove box lid key cyl-
IP-26, "Removal and Installation"
.
2. Insert key (1) into glove box lid lock cylinder (2).
3. Pull upward on glove box lid release handle (3).
4. Rotate key (1) and turn glove box lid key cylinder (2) to the lock
position.
5. Press tumbler stopper (1) into glove box lid lock cylinder (2)
using a suitable tool (A), and then remove key (3) and glove box
lid lock cylinder together from glove box lid release handle (4).
NOTE:
When removing glove box lid lock cylinder (2) note the position
of cylinder to glove box lid release handle (4).
6. Remove sleeve (3) from glove box lid release handle and then
install sleeve to glove box lid lock cylinder.
NOTE:
When removing sleeve note the position of sleeve to glove box
lid release handle.
CAUTION:
Do not pull out key (1) from glove box lid lock cylinder (2)
while sleeve (3) is removed. Otherwise, tumblers (4) may be
lost from glove box lid lock cylinder.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check glove box assembly open/close, lock/unlock operation.
ALKIA2971ZZ
JMKIA5490ZZ
JMKIA5491ZZ
JMKIA5819ZZ
DOOR SWITCH
DLK-313
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR SWITCH
Removal and Installation
INFOID:0000000009175908
REMOVAL
1. Remove the door switch bolt (A).
2. Disconnect the harness connector from the door switch (1) and
remove.
INSTALLATION
Installation is in the reverse order of removal.
ALKIA2509ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст