Nissan Pathfinder. Manual — part 387
DLK-314
< REMOVAL AND INSTALLATION >
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000009175909
The driver side door request switch and driver side outside handle are serviced as an assembly. Refer to
302, "OUTSIDE HANDLE : Removal and Installation"
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000009175910
The passenger side door request switch and passenger side outside handle are serviced as an assembly.
DLK-302, "OUTSIDE HANDLE : Removal and Installation"
BACK DOOR
BACK DOOR : Removal and Installation
INFOID:0000000009175911
REMOVAL
1. Remove the back door outer finisher. Refer to
EXT-43, "Removal and Installation"
.
2. Disconnect the harness connector from the back door request switch.
3. Remove the back door request switch.
INSTALLATION
Installation is in the reverse order of removal.
INSIDE KEY ANTENNA
DLK-315
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INSIDE KEY ANTENNA
INSTRUMENT CENTER
INSTRUMENT CENTER : Removal and Installation
INFOID:0000000009175912
REMOVAL
1. Remove cluster lid C upper. Refer to
IP-22, "CLUSTER LID C : Removal and Installation"
.
2. Remove the inside key antenna (instrument center) screw, and then remove inside key antenna (instru-
ment center).
INSTALLATION
Installation is in the reverse order of removal.
CONSOLE
CONSOLE : Removal and Installation
INFOID:0000000009175913
REMOVAL
1. Remove rear center ventilator duct. Refer to
VTL-12, "REAR CENTER VENTILATOR DUCT : Removal
2. Remove the inside key antenna (console) screws and inside key antenna (console).
INSTALLATION
Installation is in the reverse order of removal.
LUGGAGE ROOM
LUGGAGE ROOM : Removal and Installation
INFOID:0000000009175914
REMOVAL
1. Remove the second row seatback. Refer to
SE-94, "Removal and Installation"
2. Remove the inside key antenna (luggage room) clip, and then remove inside key antenna (luggage room).
INSTALLATION
Installation is in the reverse order of removal.
DLK-316
< REMOVAL AND INSTALLATION >
OUTSIDE KEY ANTENNA
OUTSIDE KEY ANTENNA
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000009175915
The driver side outside key antenna and driver side outside handle are serviced as an assembly. Refer to
DLK-302, "OUTSIDE HANDLE : Removal and Installation"
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000009175916
The passenger side outside key antenna and passenger side outside handle are serviced as an assembly.
DLK-302, "OUTSIDE HANDLE : Removal and Installation"
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000009175917
REMOVAL
1. Remove rear bumper fascia. Refer to
EXT-20, "Removal and Installation"
2. Disconnect the harness connector from the rear bumper outside key antenna and remove.
INSTALLATION
Installation is in the reverse order of removal.
INTELLIGENT KEY WARNING BUZZER
DLK-317
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000009175918
REMOVAL
NOTE:
The Intelligent Key warning buzzer is located in the left front area of the engine compartment.
1. Remove Intelligent Key warning buzzer clips.
2. Disconnect the harness connector from the Intelligent Key warning buzzer and remove.
INSTALLATION
Installation is in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст