Nissan Sentra. Manual — part 910
TM-276
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
PLUG
PLUG
Description
INFOID:0000000009759534
Replace the O-ring if oil leakage or exudes from the plug.
Exploded View
INFOID:0000000009759535
Removal and Installation
INFOID:0000000009759536
NOTE:
Replace the O-rings if oil leaks or exudes from the plugs.
REMOVAL
Remove the plugs and O-rings.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply Genuine NISSAN CVT Fluid NS-3 to O-ring.
Plug
O-ring
O-ring
Plug
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Genuine NISSAN CVT Fluid NS-3
JSDIA1889GB
PLUG
TM-277
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Inspection and Adjustment
INFOID:0000000009759537
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
AdjustCVT fluid level. Refer to
.
TM-278
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
CVT OIL WARMER
CVT OIL WARMER
Exploded View
INFOID:0000000010346187
Removal and Installation
INFOID:0000000010346188
REMOVAL
WARNING:
Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure
coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
Perform these steps after the coolant temperature has cooled sufficiently.
1. Remove neighboring parts of CVT fluid warmer.
2. Remove CVT fluid warmer.
3. Remove O-ring.
INSTALLATION
Note the followings and install in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply CVT fluid to O-ring.
Inspection
INFOID:0000000010346189
INSPECTION AFTER INSTALLATION
• Start the engine and check visually that there is no leakage of engine coolant and CVT fluid.
• Check CVT fluid level.
1.
Transaxle assembly
2.
O-ring
3.
CVT oil warmer
CVT fluid
JSDIA5050GB
CVT FLUID FILTER
TM-279
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT FLUID FILTER
Exploded View
INFOID:0000000010346190
Removal and Installation
INFOID:0000000010346191
REMOVAL
1. Remove neighboring parts of CVT fluid filter.
2. Remove fluid filter cover mounting bolt (A).
1.
Transaxle assembly
2.
CVT fluid filter
3.
Fluid filter cover
CVT fluid
JSDIA5046GB
JSDIA5047ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст