Nissan Murano Z51 (2008 year). Manual — part 267
MWI
MWI-1
DRIVER INFORMATION & MULTIMEDIA
C
D
E
F
G
H
I
J
K
L
M
B
SECTION
MWI
A
O
P
CONTENTS
METER, WARNING LAMP & INDICATOR
BASIC INSPECTION . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW . . ..
Work flow . . . . . . . . . . . . . . . . ..
FUNCTION DIAGNOSIS . . . . . . . ...
METER SYSTEM . . . . . . . . . . . . .
METER SYSTEM . . . . . . . . . . . . . .....
METER SYSTEM : System Diagram . . . . . ....
METER SYSTEM : System Description . . . . ....
METER SYSTEM : Component Parts Location . ....
METER SYSTEM : Component Description . . ...
SPEEDOMETER . . . . . . . . . . . . . .
SPEEDOMETER : System Diagram . . . . . ...
SPEEDOMETER : System Description . . . . ...
SPEEDOMETER : Component Parts Location . ...
SPEEDOMETER : Component Description . . .
TACHOMETER . . . . . . . . . . . . . . ..
TACHOMETER : System Diagram . . . . . . .
TACHOMETER : System Description . . . . . .
TACHOMETER : Component Parts Location . . .
TACHOMETER : Component Description . . . ..
ENGINE COOLANT TEMPERATURE GAUGE . .
ENGINE COOLANT TEMPERATURE GAUGE :
System Diagram . . . . . . . . . . . . . ..
ENGINE COOLANT TEMPERATURE GAUGE :
System Description . . . . . . . . . . . . .
ENGINE COOLANT TEMPERATURE GAUGE :
Component Parts Location . . . . . . . . . ..
ENGINE COOLANT TEMPERATURE GAUGE :
Component Description . . . . . . . . . . ...
FUEL GAUGE . . . . . . . . . . . . . . .
FUEL GAUGE : System Diagram . . . . . . ...
FUEL GAUGE : System Description . . . . . ...
FUEL GAUGE : Component Parts Location . . ...
FUEL GAUGE : Component Description . . . .
ODO/TRIP METER . . . . . . . . . . . . . .
ODO/TRIP METER : System Diagram . . . . .
ODO/TRIP METER : System Description . . . .
ODO/TRIP METER : Component Parts Location .
ODO/TRIP METER : Component Description . . .
SHIFT POSITION INDICATOR . . . . . . . . ..
SHIFT POSITION INDICATOR : System Diagram .
SHIFT POSITION INDICATOR : System Descrip-
tion . . . . . . . . . . . . . . . . . . ...
SHIFT POSITION INDICATOR : Component
Parts Location . . . . . . . . . . . . . . ..
SHIFT POSITION INDICATOR : Component De-
scription . . . . . . . . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS . . . . ..
WARNING LAMPS/INDICATOR LAMPS : System
Diagram . . . . . . . . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : System
Description . . . . . . . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : Com-
ponent Parts Location . . . . . . . . . . . ..
WARNING LAMPS/INDICATOR LAMPS : Com-
ponent Description . . . . . . . . . . . . ...
METER ILLUMINATION CONTROL . . . . . . .
METER ILLUMINATION CONTROL : System Di-
agram . . . . . . . . . . . . . . . . . ..
METER ILLUMINATION CONTROL : System De-
scription . . . . . . . . . . . . . . . . ...
METER ILLUMINATION CONTROL : Component
Parts Location . . . . . . . . . . . . . . ..
METER ILLUMINATION CONTROL : Component
Description . . . . . . . . . . . . . . . ...
INFORMATION DISPLAY . . . . . . . . . . ..
INFORMATION DISPLAY : System Diagram . . ..
INFORMATION DISPLAY : System Description . .
INFORMATION DISPLAY : Component Parts Lo-
cation . . . . . . . . . . . . . . . . . ...
INFORMATION DISPLAY : Component Descrip-
tion . . . . . . . . . . . . . . . . . . ...
Revision: 2008 October
2009 Murano
MWI-2
COMPASS . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Component Parts Location . . . . . . . . . .
Special Repair Requirement . . . . . . . . ...
DIAGNOSIS SYSTEM (METER) . . . . . ...
Diagnosis Description . . . . . . . . . . . .
CONSULT-III Function (METER/M&A) . . . . ...
COMPONENT DIAGNOSIS . . . . . .
U1000 CAN COMM CIRCUIT . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
U1010 CONTROL UNIT (CAN) . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B2205 VEHICLE SPEED . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
B2267 ENGINE SPEED . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
B2268 WATER TEMP . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
POWER SUPPLY AND GROUND CIRCUIT . .
COMBINATION METER . . . . . . . . . . ...
COMBINATION METER : Diagnosis Procedure ....
BCM (BODY CONTROL MODULE) . . . . . . .
BCM (BODY CONTROL MODULE) : Diagnosis
Procedure . . . . . . . . . . . . . . . ...
IPDM E/R (INTELLIGENT POWER DISTRIBU-
TION MODULE ENGINE ROOM) . . . . . . . .
FUEL LEVEL SENSOR SIGNAL CIRCUIT . ...
Description . . . . . . . . . . . . . . . ..
Component Function Check . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ....
METER CONTROL SWITCH SIGNAL CIR-
CUIT . . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
Component Inspection . . . . . . . . . . ....
OIL PRESSURE SWITCH SIGNAL CIRCUIT ...
Description . . . . . . . . . . . . . . . ..
Component Function Check . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
PARKING BRAKE SWITCH SIGNAL CIR-
CUIT . . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
WASHER LEVEL SWITCH SIGNAL CIRCUIT ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
A/C AUTO AMP. CONNECTION RECOGNI-
TION SIGNAL CIRCUIT . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
COMPASS . . . . . . . . . . . . . . .
Wiring Diagram - COMPASS - . . . . . . . .
ECU DIAGNOSIS . . . . . . . . . ...
COMBINATION METER . . . . . . . . .
Reference Value . . . . . . . . . . . . . .
Wiring Diagram - METER - . . . . . . . . . .
Fail-Safe . . . . . . . . . . . . . . . . ..
DTC Index . . . . . . . . . . . . . . . ...
BCM (BODY CONTROL MODULE) . . . . ..
Reference Value . . . . . . . . . . . . . .
Wiring Diagram - BCM - . . . . . . . . . .
Fail-safe . . . . . . . . . . . . . . . .
DTC Inspection Priority Chart . . . . . . . .
DTC Index . . . . . . . . . . . . . . .
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . .
Reference Value . . . . . . . . . . . . ...
Wiring Diagram - IPDM E/R - . . . . . . . .
Fail-safe . . . . . . . . . . . . . . . .
DTC Index . . . . . . . . . . . . . . .
SYMPTOM DIAGNOSIS . . . . . . ...
THE FUEL GAUGE POINTER DOES NOT
MOVE . . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE METER CONTROL SWITCH IS INOPER-
ATIVE . . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE OIL PRESSURE WARNING LAMP
DOES NOT TURN ON . . . . . . . . . ..
Revision: 2008 October
2009 Murano
MWI
MWI-3
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE OIL PRESSURE WARNING LAMP
DOES NOT TURN OFF . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE DOOR OPEN WARNING CONTINUES
DISPLAYING, OR DOES NOT DISPLAY . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE AMBIENT TEMPERATURE DISPLAY IS
INCORRECT . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
NORMAL OPERATING CONDITION . . . .
COMPASS . . . . . . . . . . . . . . . ...
COMPASS : Description . . . . . . . . . .
INFORMATION DISPLAY . . . . . . . . . .
INFORMATION DISPLAY : Description . . . .
PRECAUTION . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . ...
ON-VEHICLE REPAIR . . . . . . . ...
COMBINATION METER . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Disassembly and Assembly . . . . . . . . ...
METER CONTROL SWITCH . . . . . . ..
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
COMPASS . . . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Revision: 2008 October
2009 Murano
MWI-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work flow
INFOID:0000000003415461
OVERALL SEQUENCE
• Reference 1···
MWI-33, "Diagnosis Description"
.
• Reference 2···
.
• Reference 3···
MWI-43, "COMBINATION METER : Diagnosis Procedure"
.
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurred.
>> GO TO 2.
2.
CHECK SYMPTOM
JSNIA0542GB
Revision: 2008 October
2009 Murano
MWI
DIAGNOSIS AND REPAIR WORKFLOW
MWI-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• Check the symptom based on the information obtained from the customer.
• Check that any other malfunctions are present.
>> GO TO 3.
3.
CHECK ON BOARD DIAGNOSIS OPERATION
Check that the on board diagnosis function operates. Refer to
MWI-33, "Diagnosis Description"
Does the on board diagnosis function operate normally?
YES
>> GO TO 4.
NO
>> GO TO 6.
4.
CHECK CONSULT-III SELF-DIAGNOSIS RESULTS
Connect CONSULT-III and perform self-diagnosis. Refer to
MWI-34, "CONSULT-III Function (METER/M&A)"
.
Are self-diagnosis results normal?
YES
>> GO TO 5.
NO
>> GO TO 8.
5.
NARROW DOWN THE MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts.
>> GO TO 8.
6.
CHECK COMBINATION METER POWER SUPPLY AND GROUND CIRCUITS
Inspect combination meter power supply and ground circuits. Refer to
.
Is inspection result OK?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
REPLACE COMBINATION METER
Replace combination meter.
>> GO TO 9.
8.
REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace the malfunctioning parts.
NOTE:
If DTC is displayed, erase DTC after repair or replace malfunctioning parts.
>> GO TO 9.
9.
FINAL CHECK
Check that the combination meter operates normally.
Do they operate normally?
YES
>> INSPECTION END
NO
>> GO TO 1.
Revision: 2008 October
2009 Murano
MWI-6
< FUNCTION DIAGNOSIS >
METER SYSTEM
FUNCTION DIAGNOSIS
METER SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000003415462
METER SYSTEM : System Description
INFOID:0000000003415463
COMBINATION METER
• The combination meter receives the information required to control the operation of each gauge, indicator/
warning lamp, and information display via CAN communication from each unit, each switch, and sensor.
• The combination meter incorporates a trip computer that displays warnings and messages on the informa-
tion display according to the information received from various units.
• The combination meter incorporates a buzzer function that sounds an audible alarm with the integrated
buzzer device. Refer to
WCS-5, "WARNING CHIME SYSTEM : System Description"
for further details.
• The combination meter integrates the meter circuit check function and the segment check function that
checks the information display operation.
IPDM E/R
• IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch signal to
the combination meter via BCM with the CAN communication line.
• IPDM E/R is equipped with the diagnosis function. It can perform the operation check of oil pressure warning
lamp with the auto active test and the diagnosis with CONSULT-III.
METER CONTROL FUNCTION LIST
JPNIA1328GB
Revision: 2008 October
2009 Murano
MWI
METER SYSTEM
MWI-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
System
Description
Signal source
Meter/gauge
Speedometer
Receives vehicle speed signal and indicates vehicle speed.
ABS actuator and elec-
tric unit (control unit)
Tachometer
Receives engine speed signal and indicates engine speed.
ECM
Fuel gauge
Receives fuel level sensor signal and indicates fuel level.
Fuel level sensor unit
Engine coolant tem-
perature gauge
Receives engine coolant temperature signal and indicates coolant
temperature.
ECM
Warning lamp/
indicator lamp
Oil pressure warning
lamp
Receives oil pressure warning lamp signal and illuminates warning
lamp.
IPDM E/R
Master warning
Illuminates according to warning output on information display.
—
Information
display
Door open warning
Receives door switch signals and displays warning.
BCM
Parking brake re-
lease warning
Receives parking brake switch signal and vehicle speed signal and
displays warnings.
Parking brake switch
ABS actuator and elec-
tric unit (control unit)
Low fuel warning
Receives fuel gauge signal and displays warning if fuel level de-
creases to 11
(2-7/8 US gal, 2-3/8 Imp gal) or less.
Fuel level sensor unit
Low washer fluid
warning
Receives washer level switch signal and displays warning.
Washer level switch
Low outside tempera-
ture warning
Monitors ambient sensor signal and displays warning if ambient
temperature decreases to 3
°
C (37
°
F) or less. (If enabled)
Ambient sensor
Instantaneous fuel
consumption
Calculates instantaneous fuel consumption based on received ve-
hicle speed signals and fuel consumption monitor signal and dis-
plays it.
ECM
ABS actuator and elec-
tric unit (control unit)
Average fuel con-
sumption
Calculates average fuel consumption in a reset-to-reset interval
based on received vehicle speed signals and fuel consumption
monitor signal and displays it.
ECM
ABS actuator and elec-
tric unit (control unit)
Average vehicle
speed
Calculates average vehicle speed in a reset-to-reset interval based
on received vehicle speed signals and displays it.
ABS actuator and elec-
tric unit (control unit)
Travel time
Displays accumulated key switch ON time from reset to reset.
—
Travel distance
Calculates accumulated travel distance in a reset-to-reset interval
based on received vehicle speed signals and displays it.
ABS actuator and elec-
tric unit (control unit)
Possible driving dis-
tance
Calculates possible driving distance based on received fuel con-
sumption monitor signal, vehicle speed signals and fuel level sen-
sor signal and displays it.
ABS actuator and elec-
tric unit (control unit)
ECM
Fuel level sensor unit
Ambient air tempera-
ture
Corrects ambient air temperature value based on received ambient
sensor signals and displays it.
Ambient sensor
Revision: 2008 October
2009 Murano
MWI-8
< FUNCTION DIAGNOSIS >
METER SYSTEM
ARRANGEMENT OF COMBINATION METER
JPNIA0736ZZ
A.
With AWD models
B.
With Intelligent Key models
C.
For U.S.A.
D.
Except for U.S.A.
Revision: 2008 October
2009 Murano
MWI
METER SYSTEM
MWI-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER SYSTEM : Component Parts Location
INFOID:0000000003415464
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
Revision: 2008 October
2009 Murano
MWI-10
< FUNCTION DIAGNOSIS >
METER SYSTEM
METER SYSTEM : Component Description
INFOID:0000000003415465
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000003415466
SPEEDOMETER : System Description
INFOID:0000000003415757
• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel
sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication.
• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-
nal received via CAN communication.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Controls the following with the signals received from each unit via CAN communication and the sig-
nals from switches and sensors.
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Warning lamps
• Indicator lamps
• Information display
IPDM E/R
IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch
signal to the combination meter via BCM with CAN communication line.
Fuel level sensor unit
Refer to
.
Oil pressure switch
Refer to
.
ECM
Transmits the following signals to the combination meter with CAN communication line.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter with CAN communication line.
BCM
Transmits signals provided by various units to the combination meter with CAN communication line.
Control device
Transmits the O/D OFF switch signal to the combination meter.
TCM
Transmits the shift position signal to the combination meter with CAN communication line.
Meter control switch
Refer to
.
Washer level switch
Transmits the washer level signal to the combination meter.
Brake fluid level switch
Transmits the brake fluid level switch signal to the combination meter.
Parking brake switch
Refer to
.
JSNIA0289GB
Revision: 2008 October
2009 Murano
MWI
METER SYSTEM
MWI-11
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER : Component Parts Location
INFOID:0000000003469957
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
Revision: 2008 October
2009 Murano
MWI-12
< FUNCTION DIAGNOSIS >
METER SYSTEM
SPEEDOMETER : Component Description
INFOID:0000000003415760
TACHOMETER
TACHOMETER : System Diagram
INFOID:0000000003415761
TACHOMETER : System Description
INFOID:0000000003415762
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the combination meter with CAN communication line.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Indicates the vehicle speed to the speedometer according to the vehicle speed signal received from
ABS actuator and electric unit (control unit) via CAN communication.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter with CAN communication line.
JSNIA0290GB
Revision: 2008 October
2009 Murano
MWI
METER SYSTEM
MWI-13
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TACHOMETER : Component Parts Location
INFOID:0000000003469958
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
Revision: 2008 October
2009 Murano
MWI-14
< FUNCTION DIAGNOSIS >
METER SYSTEM
TACHOMETER : Component Description
INFOID:0000000003415764
ENGINE COOLANT TEMPERATURE GAUGE
ENGINE COOLANT TEMPERATURE GAUGE : System Diagram
INFOID:0000000003415765
ENGINE COOLANT TEMPERATURE GAUGE : System Description
INFOID:0000000003415766
• ECM reads the engine coolant temperature signal from the engine coolant temperature sensor and transmits
the signal to the combination meter via CAN communication.
• The combination meter indicates the engine coolant temperature to the engine coolant temperature gauge
according to the engine coolant temperature signal received via CAN communication.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Indicates the engine speed to the tachometer according to the engine speed signal received from
ECM via CAN communication.
ECM
Transmits the engine speed signal to the combination meter with CAN communication line.
JSNIA0291GB
Revision: 2008 October
2009 Murano
MWI
METER SYSTEM
MWI-15
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ENGINE COOLANT TEMPERATURE GAUGE : Component Parts Location
INFOID:0000000003469959
JPNIA0813ZZ
1.
Fuel level sensor unit (sub)
2.
ABS actuator and electric unit (con-
trol unit)
3.
Oil pressure switch
4.
TCM
5.
Ambient sensor
6.
ECM
7.
IPDM E/R
8.
BCM
9.
Combination meter
10.
Fuel level sensor unit and fuel pump
(main)
Revision: 2008 October
2009 Murano
MWI-16
< FUNCTION DIAGNOSIS >
METER SYSTEM
ENGINE COOLANT TEMPERATURE GAUGE : Component Description
INFOID:0000000003415768
FUEL GAUGE
FUEL GAUGE : System Diagram
INFOID:0000000003415769
FUEL GAUGE : System Description
INFOID:0000000003443689
CONTROL OUTLINE
The combination meter reads the fuel level sensor signal from the fuel level sensor unit and indicates the fuel
level to the fuel gauge.
REFUEL CONTROL
The combination meter accelerates the fuel gauge segment if the all conditions listed below are met, or the
ignition switch is ON from OFF.
• Ignition switch is ON position.
• The vehicle is not moving.
• The fuel level change by 15 (4 US gal, 3-1/4 lmp gal) or more.
A.
Lower right side of rear seat
B.
Engine room (RH)
C.
Engine front side
D.
Engine room (LH)
E.
Front bumper (left back)
F.
Engine room (LH)
G.
Engine room (LH)
H.
Behind the combination meter
I.
Lower left side of rear seat
Unit
Description
Combination meter
Indicates the engine coolant temperature to the engine coolant temperature gauge according to the
engine coolant temperature signal received from ECM via CAN communication.
ECM
Transmits the engine coolant temperature signal to the combination meter via CAN communication.
JSNIA0511GB
Revision: 2008 October
2009 Murano
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст