Kia Carnival (2009+). Manual — part 268

2009 > G 2.7 DOHC >

COMPONENTS

2009 > G 2.7 DOHC >

REMOVAL

1. Raise the vehicle and remove the wheel & tire assembly (A) from the front hub assembly (B).

Tightening torque Nm (Kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)

2. Remove the wheel speed sensor & wire (A) by loosening the bolts.

3. Disconnect the brake hose (A) from the strut assembly.

4. Unstake the driveshaft lock nut using a chisel and hammer.

5. Remove the driveshaft lock nut (A).

Tightening torque Nm (kgf,m, lb-ft):
245 ~ 275 (24.5 ~ 27.5, 177 ~ 199)

6. Remove the caliper assembly (A) from the knuckle and suspend it with wire.

Tightening torque Nm (kgf,m, lb-ft):
85 ~ 100 (8.5 ~ 10.0, 61 ~ 72)

7. Remove the split pin and castle nut from the tie rod end ball joint.

Tightening torque Nm (Kgf.m, lb-ft):
60 ~ 80 (6.0 ~ 8.0, 43 ~ 58)

8. Disconnect the tie rod end (A) from the knuckle using a SST (09568-4A000).

9. Remove the split pin and lower arm bolt and nut (A).