Toyota Tundra. Manual — part 722
Fig. 26: Identifying Rear Power Window Regulator Motor Assembly LH Connector
Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (see
REMOVAL )
OK: Go to Next Step
5. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - REAR SWITCH LH)
Fig. 27: Identifying N2 Master Switch And O11 Rear Switch Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Windshield/WindowGlass - Tundra
a. Disconnect the N2 master switch connector.
b. Disconnect the O11 switch connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
STANDARD RESISTANCE TESTER CONNECTION SPECIFIED CONDITION
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: Go to Next Step
6. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Remove the master switch (see REMOVAL ).
b. Reconnect the master switch connector.
c. Measure the voltage according to the value(s) in the table below.
Standard voltage
STANDARD VOLTAGE TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
N2-12 (U) - O11-5 (SU)
Always
Below 1 ohms
N2-13 (D) - O11-2 (SD)
N2-12 (U) or O11-5 (SU) - Body ground
Always
10 kohms or higher
N2-13(D) or O11-2 (SD) - Body ground
Tester
Connection
Switch Condition
Specified
Condition
N2-12 (U) - N2-1
(E)
Ignition switch ON, rear LH side door power window
regulator switch OFF --> UP
Below 1 V --> 11 to
14 V
N2-13 (D) - N2-1
(E)
Ignition switch ON, rear LH side door power window
regulator switch OFF --> DOWN
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Windshield/WindowGlass - Tundra
Fig. 28: Identifying N2 Master Switch Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (see
REMOVAL )
OK: Go TO POWER WINDOWS DO NOT OPERATE AT ALL
REAR POWER WINDOW RH DOES NOT OPERATE WITH REAR POWER WINDOW SWITCH
RH
DESCRIPTION
HINT:
for Double Cab, CrewMax
If the rear RH side manual UP/DOWN function does not operate, there may be a malfunction in the rear power
window regulator switch RH, rear power window regulator motor RH, power window regulator master switch
or Harness and connector.
WIRING DIAGRAM
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Windshield/WindowGlass - Tundra
Fig. 29: Rear Power Window Regulator Motor Assembly RH Wiring Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION PROCEDURE
1. CHECK HARNESS AND CONNECTOR (REAR SWITCH RH - BATTERY)
a. Disconnect the O5 switch connector.
b. Measure the voltage according to the value(s) in the table below.
Standard voltage
STANDARD VOLTAGE TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Switch Condition Specified Condition
O5-3 (B) - Body ground Ignition switch ON
11 to 14 V
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Windshield/WindowGlass - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст