Toyota Tundra. Manual — part 426
2. INSPECT LIGHT CONTROL RHEOSTAT
Fig. 38: Light Control Rheostat Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Remove the light control rheostat (see REMOVAL ).
b. Measure the resistance according to the table below.
Standard resistance:
w/o TAIL Cancel Switch
STANDARD RESISTANCE W/O TAIL CANCEL SWITCH REFERENCE
Tester Connection
Switch Condition
Specified Condition
3 (RV) -1 (E)
Downward --> Upward
See illustration
7 (T) -1 (E)
Downward --> Upward 10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
w/ TAIL Cancel Switch
STANDARD RESISTANCE W/ TAIL CANCEL SWITCH REFERENCE
NG: REPLACE LIGHT CONTROL RHEOSTAT (see REMOVAL )
OK: Go to next step
3. CHECK HARNESS AND CONNECTOR (COMBINATION METER - LIGHT CONTROL
RHEOSTAT)
a. Disconnect the J28 meter connector.
b. Disconnect the L4 rheostat connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance:
w/o TAIL Cancel Switch
STANDARD RESISTANCE W/O TAIL CANCEL SWITCH REFERENCE
w/ TAIL Cancel Switch
STANDARD RESISTANCE W/ TAIL CANCEL SWITCH REFERENCE
Tester Connection
Switch Condition
Specified Condition
3 (RV) -1 (E)
Downward --> Upward
See illustration
5 (TC) -1 (E)
Downward --> Upward 10 kohms or higher
7 (T) -1 (E)
Tester Connection
Condition Specified Condition
J28-1 (RHIG) - L4-7 (T)
Always
Below 1 ohms
J28-2 (TR) - L4-3 (RV)
J28-3 (E2) - L4-1 (E)
Tester Connection
Condition Specified Condition
J28-1 (RHIG) - L4-7 (T)
Always
Below 1 ohms
J28-2 (TR) - L4-3 (RV)
J28-3 (E2) - L4-1 (E)
J28-38 (TC) - L4-5 (TC)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Fig. 39: Identifying L4 Rheostat Connector Terminal J28 Meter Connector Terminal
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
METER ILLUMINATION IS ALWAYS DARK
DESCRIPTION
When the ignition switch is turned to ACC or ON, the accessory meter operates as follows.
w/ Cruise information:
The accessory meter receives light control switch signals and combination meter signals, and performs
illumination dim operations.
w/o Cruise information:
The accessory meter receives light control switch signals and performs illumination dim operations.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
WIRING DIAGRAM
Fig. 40: Meter Illumination Is Always Dark - Wiring Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION PROCEDURE
1. CHECK ILLUMINATION FUNCTION
a. Check the illumination function.
Result
ILLUMINATION FUNCTION RESULT REFERENCE
B: Go to PROBLEM SYMPTOMS TABLE
A: Go to next step
2. INSPECT FUSE (PANEL)
Result
Proceed to
Accessory meter illumination is always dark
A
Combination meter illumination is always dark
B
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст