Toyota Tundra (2015 year). Manual — part 861
replace the spider bearing.
3. INSPECT NO. 1 CENTER SUPPORT BEARING ASSEMBLY
(a) Check that the bearing turns freely.
If the bearing is damaged, worn, or does not turn freely,
replace it.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HBS00CX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): REASSEMBLY; 2015 MY Tundra [08/2014 -
]
REASSEMBLY
1. INSTALL REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same installation procedure for both the front and rear propeller shaft universal joint spider
bearings.
(a) Apply MP grease to a new spider and 4 new bearings.
NOTICE:
Be careful not to apply too much grease.
(b) Measure dimension A between the snap ring grooves.
(c) Install the 4 spider bearings to the spider journal portions, and
When measuring dimension B, fix the spider and spider bearings
in a vise and hold them firmly together.
(d) w/o Grease Fitting Spider Bearing:
(1) Select snap rings to make dimensions A and B the same.
Snap ring type for steel yoke:
COLOR
THICKNESS
Purple
1.46 mm (0.0574 in.)
Black
1.49 mm (0.0586 in.)
Copper
1.51 mm (0.0594 in.)
White
1.56 mm (0.0614 in.)
Yellow
1.59 mm (0.0625 in.)
Blue
1.64 mm (0.0646 in.)
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Snap ring type for aluminum yoke:
COLOR
THICKNESS
Black
1.52 mm (0.0598 in.)
Black
1.54 mm (0.0606 in.)
Black
1.57 mm (0.0618 in.)
Black
1.62 mm (0.0638 in.)
NOTICE:
(1) Select snap rings to make dimensions A and B the same.
Snap ring type:
COLOR
THICKNESS
Black
1.49 mm (0.0586 in.)
Copper
1.51 mm (0.0594 in.)
White
1.56 mm (0.0614 in.)
Yellow
1.59 mm (0.0625 in.)
NOTICE:
(g) Using SST, press the universal joint spider bearing into the
flange yoke until the groove can be seen.
SST: 09336-16010
SST: 09950-40011
09951-04020
09952-04010
09953-04020
09954-04020
09955-04051
09957-04010
SST: 09950-60010
09951-00290
Text in Illustration
*a
Spider Bearing
*b
Turn
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
*c
Hold
NOTICE:
Confirm that the universal joint spider moves smoothly while
pressing in the bearing.
(h) Using needle-nose pliers, install the previously selected snap
Use the same installation procedure for the universal joint spider
bearing on the opposite side.
(i) Temporarily install the spider and 2 universal joint spider bearings into the shaft yoke.
(j) Using SST, press the universal joint spider bearing into the shaft
yoke until the groove can be seen.
SST: 09336-16010
SST: 09950-40011
09951-04020
09952-04010
09953-04020
09954-04020
09955-04051
09957-04010
SST: 09950-60010
09951-00290
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Position SST (09336-16010) so that the cutout faces the shaft
tube.
Confirm that the universal joint spider moves smoothly while
pressing in the bearing.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст