Ford Galaxy / Ford S-MAX. Manual — part 233

39. Torque: 10 Nm

40. Torque: 23 Nm

41. Torque: 24 Nm

42. Install the Air Cleaner.

Refer to:

Air Cleaner

(303-12D Intake Air Distribution

and Filtering - 1.8L Duratorq-TDCi (74kW/100PS) -
Lynx/1.8L Duratorq-TDCi (92kW/125PS) - Lynx,
Removal and Installation).

43. Connect the battery ground cable.

Refer to:

Battery Disconnect and Connect

(414-01

Battery, Mounting and Cables, General Procedures).

44. Refer to:

Door Window Motor Initialization

(501-11

Glass, Frames and Mechanisms, General Procedures).

45. Change the engine oil and the oil filter.

Material:

Engine Oil - 5W-30 (WSS-M2C912-A1)

46. Bleed the cooling system.

Refer to:

Cooling System Draining, Filling and Bleeding

(303-03D Engine Cooling - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-TDCi
(92kW/125PS) - Lynx, General Procedures).

47.

48.

49.

Engine - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-
TDCi (92kW/125PS) - Lynx - Oil Pan

S-MAX/Galaxy 2006.5 (02/2006-)

Print

Removal and Installation

Special Tool(s)

Materials

Removal

205-047
Slide Hammer

303-633
Adapter for 205-047

Name

Specification

Engine Oil - 5W-30 WSS-M2C912-A1

Silicone Sealant LB WSE-M4G323-A4 / 2U7J-M4G323-AA

1. Refer to:

Lifting

(100-02 Jacking and Lifting,

Description and Operation).

2.

3.

NOTE: The seal is to be reused unless
damaged.

Drain the engine oil into a suitable container.

4.

CAUTION: Take extra care not to

damage the mating faces.

Special Tool(s):

303-633

,

205-047

Installation

1.

NOTE: Make sure that the mating faces are
clean and free of foreign material.

2.

CAUTION: Make sure that no excess

sealant residue is evident.
NOTE: The component must be installed
within 5 minutes of applying the sealant.

Apply a 2.5 mm diameter bead of sealant to the
edge of the Oil Pan.

Material:

Silicone Sealant LB (WSE-M4G323-A4 /

2U7J-M4G323-AA)

3. Tighten the Oil Pan retaining nuts and bolts in

the sequence shown.

Torque:

1-18

6.5 Nm
14 Nm

19 36 Nm

Stage 1:
Stage 2:

4.

5. Fill the engine with engine oil.