Ford Galaxy / Ford S-MAX. Manual — part 247
28. Torque: 23 Nm
29. Torque: 24 Nm
30.
CAUTION: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with
cold water.
Bleed the clutch system.
Refer to: Clutch System Bleeding (308-00, General Procedures).
31.
CAUTION: Gearshift cables must not be kinked or bent.
Install the gearshift cables.
32. Adjust the gearshift cables.
Refer to:
Gearshift Cable Adjustment - Vehicles With: 5
Transmission/Transaxle and Clutch - General Information, General Procedures).
33.
34.
35.
36.
37.
38. Torque: 12 Nm
39. Install the battery.
Refer to:
Battery
(414-01 Battery, Mounting and Cables, Removal and Installation).
40. Bleed the cooling system.
Refer to:
Cooling System Draining, Filling and Bleeding
Lynx/1.8L Duratorq-TDCi (92kW/125PS) - Lynx, General Procedures).
41. Install the air cleaner.
Refer to:
Air Cleaner
(303-12D Intake Air Distribution and Filtering
Duratorq-TDCi (92kW/125PS) - Lynx, Removal and Installation).
42.
Engine - 1.8L Duratorq-TDCi (74kW/100PS) - Lynx/1.8L Duratorq-TDCi
(92kW/125PS) - Lynx - Engine—Vehicles With: 6-Speed Manual Transaxle
(MMT6)
Installation
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
Cable ties
Vehicle/axle stands
1. Refer to:
Diesel Fuel System Health and Safety Precautions
2. Install the transaxle to the engine.
3. Torque: 48 Nm
4. Torque: 48 Nm
5. Torque: 48 Nm
6. Torque: 48 Nm
7. Torque: 48 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст