Ford Ranger EV (2001 year). Manual — part 193
414-03B-168
414-03B-168
High Voltage/Traction Battery — Nickel Metal Hydride
REMOVAL AND INSTALLATION (Continued)
9. Unclip the battery hold down tie bar cover.
10. Remove the battery hold down strap bolt and
pull the straps back off the battery hold down
tie bar.
11. Remove the battery hold down tie bar.
12. Remove the module hold down.
1 Remove the bolts.
2 Remove the hold down.
414-03B-169
414-03B-169
High Voltage/Traction Battery — Nickel Metal Hydride
REMOVAL AND INSTALLATION (Continued)
13. Disconnect the necessary module.
•
Disconnect the HVJ cables and discard the
nuts.
14. Using the special tool, remove the module.
Installation
1. NOTE: The arrow on the battery hold down tie
bars must be pointed towards the front of the
traction battery.
To install, reverse the removal procedure.
•
Fill the high-voltage jumper connectors with
Nyogel after final tightening of the nuts.
414-03B-170
414-03B-170
High Voltage/Traction Battery — Nickel Metal Hydride
REMOVAL AND INSTALLATION (Continued)
414-03B-171
414-03B-171
High Voltage/Traction Battery — Nickel Metal Hydride
REMOVAL AND INSTALLATION (Continued)
Independent Observer Module — (IOM)
Removal
1. Remove the traction battery. Refer to
2. Remove the traction battery cover.
1 Remove the 22 bolts.
2 Remove the cover.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст