Ford Falcon. Manual — part 413
501-08-8
Exterior Trim and Ornamentation
501-08-8
REMOVAL AND INSTALLATION (Continued)
3. Press the BSPM firmly onto body starting from the
front of the panel and apply minimum of 100N
pressure over the full length of BSPM.
Repeat to ensure adequate wet-out of the double
sided tape.
NOTE: Moulding should have a constant gap to
the door feature line and be consistent to the
other door. Moulding should not be riding up on
the door or fender feature line.
Item
Description
1
Moulding Asy Body Side Half Car Set
2
Moulding Asy Front Door
3
Moulding Asy Rear Door
4
Moulding Asy Body Side Rear
Roof Ditch Moulding
Removal
Item
Description
1. Remove the existing roof ditch moulding.
1
Moulding Asy Body Side Half Car Set
2
Moulding Asy Front Door
3
Moulding Asy Rear Door
2. Use an adhesive cleaner to remove tape residue
from the channel.
Installation
1. Remove the backing tape from the new moulding.
Item
Description
2. Align corner of moulding tail with the rear corner
1
Moulding Asy Body Side Half Car Set
of roof.
2
Moulding Asy Door
3. Place body of moulding in channel.
3
Moulding Asy Cabin Side
4. Ensure uniform pressure is applied to molding
4
Moulding Asy Style Side Box
using a roller.
Decklid Spoiler
Removal
1. Disconnect the wiring loom from the license plate
lamp via the rear of inside left hand side decklid
panel.
G86731 en
501-08-9
Exterior Trim and Ornamentation
501-08-9
REMOVAL AND INSTALLATION (Continued)
2. Remove the screws from each spoiler foot via the
inside edges of decklid.
Item
Description
1
Nut
2
Rear Spoiler
3. Lift the spoiler assembly off the decklid, pulling
the wiring loom through the hole.
Item
Description
1
Rear Spoiler
2
Nut
Installation
1. To install, reverse the removal procedure.
G86733 en
501-09-1
Rear View Mirrors
501-09-1
SECTION : 501-09 Rear View Mirrors
VEHICLE APPLICATION : 2003.0 BA Falcon
CONTENTS
PAGE
SPECIFICATIONS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .501-09-2
DESCRIPTION AND OPERATION
Rear View Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..501-09-3
DIAGNOSIS AND TESTING
Rear View Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..501-09-4
Inspection and Verification . . . . . . . . . . . . . . . . . . . . . . . . ...501-09-4
Symptom
Chart
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501-09-4
Connector Circuit Reference . . . . . . . . . . . . . . . . . . . . . . . . 501-09-6
Pinpoint
Tests
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..501-09-7
REMOVAL AND INSTALLATION
Power Mirror Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 501-09-12
Exterior Mirror Glass . . . . . . . . . . . . . . . . . . . . . . . . . . ...501-09-13
Exterior Mirror & Round Plug in Door Trim . . . . . . . . . . . . . . . . . . ..501-09-14
Interior Rear View Mirror . . . . . . . . . . . . . . . . . . . . . . . . . .501-09-14
Ambient Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . ..501-09-14
501-09-2
Rear View Mirrors
501-09-2
SPECIFICATIONS
Torque Specifications
Description
Nm
Exterior rear view mirror screws (Part
3-5
No:V810181)
G90850 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст