Chery B14. Manual — part 25

5.1.3 Open glasses box and disassemble fixing screw.

Torque is 1.5±0.5Nm

5.1.4 Take off cable inserting.

5.1.5 Take off front ceiling light assembly.

5.2 Assembly steps

The installing steps are reverse to those for removal.

6 Disassembly/assembly of rear ceiling light

6.1 Disassembly steps

6.1.1 Prize rear ceiling light trim cover by flat head

screwdriver. Note: do not scratch trim part.

6.1.2 Unscrew rear ceiling light fixing bolt.

Torque is1.5±0.5Nm

6.1.3 Take off rear ceiling light.

6.2 Assembly steps

The installing steps are reverse to those for removal.

7 Disassembly/assembly of A pillar protecting board

7.1 Disassembly steps

7.1.1 Disassemble A pillar protecting board lower trim

cover.

7.1.2 Prize A pillar protecting board by flat head

screwdriver.

7.1.3 Take out A pillar protecting board.

7.2 Assembly steps

The installing steps are reverse to those for removal.

8 Disassembly/assembly of B pillar protecting board

8.1 Disassembly steps

8.1.1 Disassemble B pillar lower protecting board (refer

to disassembly/assembly of seat belt)

8.1.2 Disassemble B pillar upper protecting board fixing

screw by cross head screwdriver.

8.1.3 Prize B pillar upper protecting board by flat head

screwdriver.

Note: protect the trim part surface from scratching.

8.2 Assembly steps

The installing steps are reverse to those for removal.

9 Disassembly/assembly of C pillar and D pillar protecting board

9.1 Disassembly steps

9.1.1 Unscrew luggage compartment glove box two

fixing bolts by No. 7 socket spanner. Take out glove box.

Torque is 1.5±0.5N.m

9.1.2 Unscrew glove box rear panel assembly fixing

bolt by No.8 socket spanner. Take out glove box panel.

Torque is 5±1 N.m

9.1.3，Unscrew rear seat lower fixing bolt by No. 17 socket

spanner. Take out rear seats.

Torque is 25±3 Nm

9.1.4 Loose C/D pillar lower protecting board fixing

screws (totally two) by No. 10 sleeve.

Torque is 9±3Nm

9.1.5 Prize C/D pillar lower protecting board fixing

clip by flat head screwdriver.

9.1.6 Take off rear door opening rubber seal by hand.

9.1.7 Prize C/D pillar lower protecting board by

screwdriver, take off C/D pillar protecting board.

9.1.8 Prize D pillar upper protecting board and take off D

pillar upper protecting board.

9.1.9 Prize C pillar upper protecting board and take off C

pillar upper protecting board.

9.2 Assembly steps

The installing steps are reverse to those for removal.

10 Disassembly/assembly of the roof

10.1 Disassembly steps

10.1.1 Disassemble left and right sunvisors.

(Refer to disassembly/assembly of sunvisors)