Chery B14. Manual — part 33
6.1.10 Take off heating cover plate assembly
6.1.11 Tear down sponge seal around water inlet and
outlet pipe, take off heating water tank cover plate.
6.1.12 Take off heating water tank
6.2 Assembly steps
The installing steps are reverse to those for removal.
Carry out checks for system evacuating, keep pressure,
antifreeze leaking.
Check if the radiator is blocked. Clear the blocked radiator.
7 Disassembly/assembly of mode ventilator
motor and related mechanism
7.1 Disassembly/assembly steps
7.1.1 Take off motor plug
7.1.2 Disassemble mode ventilator connecting rod
7.1.3 Loose 3 fixing screws of mode ventilator motor,
and disassemble mode ventilator motor
7.1.4 Loose control disc fixing screw, take off control
disc
7.1.5 Disassemble 3 screws and shims which control
arm for defrost, blowing head and blowing feet behind
of control disc.
7.2 Assembly steps
The installing steps are reverse to those for removal.
8 Disassembly/assembly of mixing ventilator
motor and related mechanism
8.1 Disassembly steps
8.1.1 Take off motor plug
8.1.2 Disassemble mixing ventilator pull rod
8.1.3 Loose 3 screws of mixing ventilator control motor
, and disassemble the motor
8.1.4 Disassemble mixing ventilator control arm
8.2 Assembly steps
The installing steps are reverse to those for removal.
9 Disassembly/assembly of inside/outside
circulation ventilator motor and related
mechanism
9.1 Disassembly steps
9.1.1 Take off motor plug
9.1.2 Disassemble inside/outside circulation ventilator
pull rod
9.1.3 Loose 3 screws of inside/outside circulation
ventilator motor, and disassemble the motor
9.2 Assembly steps
The installing steps are reverse to those for removal.
10 Disassembly/assembly of evaporator
10.1 Disassembly steps
10.1.1 Disassemble evaporator assembly (Refer to
disassembly of evaporator)
10.1.2 Disassemble AC cable (Refer to disassembly of
AC cable)
10.1.3 Disassemble evaporator water temperature
sensor (Refer to disassembly of evaporator water
temperature sensor)
10.1.4 Disassemble mode ventilator connection rod
(Refer to disassembly of mode ventilator connection rod)
10.1.5 Disassemble cooling/heating control
ventilator pull rod
10.1.6 Disassemble 14 bolts from evaporator housing,
decomposing evaporator housing
Note: sponge seal around housing is one time using
10.1.7 Disassemble evaporator assembly
10.2 Assemble evaporator assembly
The installing steps are reverse to those for removal.
Carry out checks for system evacuating, keep pressure,
antifreeze leaking.
Check if the radiator is blocked. Clear the blocked radiator
11
Disassemble
other
accessories
from
evaporator
11.1 Disassembly steps
11.1.1 Disassemble 4 bolts from lower ventilator by
cross head screwdriver
11.1.2 Take off ventilator
11.1.3 Disassemble inside/outside circulation ventilator
pull rod (Refer to disassembly of inside/outside circulation
motor)
11.1.4 Loose 4 bolts of inside/outside circulation
ventilator
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст