Chery B14. Manual — part 15
5 Disassembly of rear wiper water nozzle
Tool: flat head screwdriver
5.1 Disassembly steps
5.1.1 Take out the rear water injection nozzle
(Prize it by flat head screwdriver but avoid to damage the
surface paint)
5.1.2 Enhance the nozzle and expose the water injection
hose
5.1.3 Take out the water injection hose
5.2 Assembly steps
The installing steps are reverse to those for removal.
Note:Water injection opening should be opposite to wiper
motor steering shaft.
6 Disassembly of rear wiper motor
6.1 Disassembly steps
Tool: No. 10 socket spanner
6.1.1 Take away the rear wiper protecting cover by hand
6.1.2 Screw off the nut above the motor by No. 10
spanner and take out the rear wiper blades.
6.1.3 Disassemble these three fixing bolts from wiper
motor. Installation torque is 12±2Nm
6.1.4 Take off motor plug and take out of motor.
6.2 Assembly steps
The installing steps are reverse to those for removal.
7 Disassembly of license plate light trim panel
Tool: No. 10 socket
7.1 Disassembly/assembly steps
7.1.1 Disassemble the rear wiper motor first ( see rear
wiper motor disassembly)
7.1.2 Take out 7 nuts from the installation holes
below the luggage compartment.
7.1.3 Disassemble the trim panel
7.2 Assembly steps
The installing steps are reverse to those for removal.
8 Disassembly of luggage compartment handle
Tool: No. 10 socket spanner
8.1 Disassembly steps
8.1.1 Disassemble rear wiper motor
(see disassembly of rear wiper motor)
8.1.2 Separate luggage compartment handle cable
8.1.3 Take off seven nuts from rear license plate light
trim cover
8.1.4 Disassemble the license plate light trim panel
(See disassembly and assembly of license plate light
trim panel)
8.1.5 Disassemble luggage compartment handle fixing
bolts by socket spanner and get off the luggage compart
ment handle.
8.2 Assembly steps
The installing steps are reverse to those for removal.
9 Disassembly of license plate light
Tool: flat head screwdriver
9.1 Disassembly steps
9.1.1 Take out the luggage compartment inside trim
panel (See disassembly of rear lid)
9.1.2 Disassemble the license plate light trim panel
(See disassembly of license plate light trim panel)
9.1.3 Break the connection plug of left and right
license plate light
9.1.4 Disassemble the fixing screw and license plate
light by cross head screwdriver.
Note: the right rear license plate light plug is located
inside of the rear cover and difficult to be pull out and
insert, disassemble the bulb of license plate light and
then pull out and insert.
9.1.5 Take off the license plate light
9.2 Assembly steps
The installing steps are reverse to those for removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст