Chery B14. Manual — part 17
1.6 Take away two fixing screws on the driver pedal with
socket spanner and take off the pedal.
Installation torque is 7±1N.m
1.7 Take off the carpet by taking off the carpet connectors
2 Assembly of carpet
2.1 Put the carpet into car, take out the cable which
connected to seat and press the bypass way carpet solidly
2.2 Pave the left front carpet to brake pedal and expose
the hole from the carpet holes
2.3 Pave the carpet left, middle and rear side along the car
bottom shape solidly and expose the front and rear seat
installation holes.
2.4 Pave the carpet right front side to evaporator
underside
2.5 Take out the connecting cable of right front seat
from carpet holes and pave it solidly
2.6 Pave carpet right, rear and middle side along to the
shape of car bottom and expose right front seat installation
holes
2.7 Pave the carpet rear side along car bottom
V. Disassembly of Shock Absorber
1 Disassembly steps
1.1 Disassemble the carpet (See disassembly of carpet)
1.2 Take off all the shock absorbers
The positions of shock absorber are shown as below chart
2 Assembly steps
2.1 The installing steps are reverse to those for removal.
2.2 Note of installation:
2.2.1 Tidy up the seat and rear oxygen sensor connecting cable before installing the shock
absorber.
2.2.2 Make the shock absorber lower surface joint tightly with plate work.
Front right shock absorber(B14-5110013)
Left front shock absorber
(B14-5110011)
Central passage left shock absorber
(B14-5110017)
Central left shock absorber
(B14-5110021)
Left rear shock absorber(B14-5110031)
Right rear shock absorber(B14-5110033)
Central passage rear shock absorber(B14-5110037)
Central passage right shock absorber(B14-5110019)
Central right shock absorber(B14-5110023)
Chaper Three Disassembly/Assembly and Maintenance of
Door
I. Disassembly/assembly and maintenance of front door
1. System diagram
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст