Chery Tiggo 5 (T21). Manual — part 234
18–
125
18
Gear Shift Control Mechanism
Removal
1. Apply the parking brake.
2. Turn off all the electrical devices and ignition switch.
3. Disconnect the negative battery cable.
4. Insert the mechanical key (3) in the emergency unlock
hole (2) and press the mechanical key to hold down the
emergency unlock switch, and move the shift lever (1) to
the N (neutral) position to release the shift lock.
5. Remove the auxiliary fascia console assembly (
).
6. Disconnect the gear shift control mechanism wire
harness connector (1).
7. Disconnect the transmission gear shift cable (1) from the
gear shift control mechanism (2).
8. Remove the gear shift control mechanism fixing bolts.
(Tightening torque: 18 - 22 N·m)
9. Take out the gear shift control mechanism (1).
R
S
3
1
2
RT21180440
1
RT21180550
1
2
RT21180560
1
RT21180570
18–
126
18
Installation
Installation is in the reverse order of removal.
CAUTION
After installation, inspect the gear shift lever for gear shift positions. Adjust the gear shift cable as
necessary (
).
18–
127
18
Gear Shift Cable
Removal
1. Apply the parking brake.
2. Turn off all the electrical devices and ignition switch.
3. Disconnect the negative battery cable.
4. Insert the mechanical key (3) in the emergency unlock
hole (2) and press the mechanical key to hold down the
emergency unlock switch, and move the shift lever (1) to
the N (neutral) position to release the shift lock.
5. Disconnect the transmission gear shift cable from the gear shift control mechanism (
).
6. Remove the air filter (
).
7. Remove the connecting nut (3) between the gear shift
cable (1) and arm (2). Disconnect the gear shift cable
from the shift arm.
(Tightening torque: 16 - 20 N·m)
8. Remove the gear shift cable flexible shaft clamp.
CAUTION
When removing and installing the gear shift cable, make sure that the gear shift lever is at "N" position.
R
S
3
1
2
RT21180440
RT21180590
1
3
2
RT21180600
18–
128
18
9. Remove the gear shift cable dust boot fixing bolts from
the vehicle body.
(Tightening torque: 8 - 10 N·m)
10.Take out the gear shift cable.
Installation
Installation is in the reverse order of removal.
RT21180610
CAUTION
After installation, inspect the gear shift lever for gear shift positions. Adjust the gear shift cable as
necessary (
).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст