Chery A18. Manual — part 61
1.3. Prize up the shield of the changing gear mechanism
with the slotted screwdriver
1.4. Unscrew bolts connecting the console with the
carbody with the Phillips screwdriver
Moment: 3±0.5N.m
1.5. Prize up 2 clips shown as the figure with the slotted
screwdriver
1.6. Take out the console with two hands
1.7. Take out the plug of the smoke lighter
2. Assembly steps
Assemble according to the inverted sequence of the disassembly
IV. Disassembly & assembly of the carpet
Preparation tools: Slotted screwdriver, Phillips screwdriver,
socket wrench
1. Disassembly steps
1.1. Disassemble the front, middle and rear row seats. (See
the disassembly of the seat)
1.2. Disassemble the threshold pressing panel, B pillar, C
pillar and under shield of the D pillar. (See the disassembly
of the B pillar, C pillar and D pillar)
1.3. Disassemble the console & the shield of the manual
brake. (See the disassembly of the console & the shield of
the manual brake)
1.4. Unscrew 5 plastic covers at left & right sides under
the instrumental panel
1.5. Disassemble the trim parts of the limiting device of the
throttle pedal
1.6. Unscrew 3 fixing bolts of the left & right shields under
the instrumental panel with the Phillips screwdriver and
take out shields
Moment: 3±0.5N.m
1.7. Take out all the plugs of plug-in units in the carpet hole
and take out the carpet
2. Assembly steps
2.1. Put the carpet in the car, compact the carpet of the
middle path, uncover the corresponding hole from the
carpet hole and compact the carpet.
2.2. Pave the left & central carpet according to the shape
of the car floor, uncover the assembly holes of left & front
seats and compact the carpet.
2.3. Pave the right & central carpet according to the shape
of the car floor, uncover the assembly holes of right front
& rear seats and compact the carpet.
2.4. Pave the rear carpet along the end of the car.
V. Disassembly of the shock pad
1. Disassembly steps
1.1. Disassemble the carpet (See the disassembly of the carpet).
1.2. Remove all the shock pads.
There is the shock pad before the middle row which is similarly arranged with the Chery Futwin
Coupe.
2. Assembly steps
2.1. Assemble according to the inverted sequence of the disassembly
2.2. Assembly attentions:
2.2.1. Tidy up the plug-in wiring harness of seats & rear oxygen sensor when paving the shock pad
2.2.2. The undersurface of the shock pad inosculates with the plate work
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст