Chery Tiggo T11 LHD. Manual — part 94
T11 Service Manual Transmission
118
Section Ⅷ Clutch Box
1. Clutch box
2. Oil seal-input shaft
3. Bearing-gear shifting mechanism
4. Output shaft front bearing
5. Oil seal-differential
6. Front/rear bearing of differential
7. Buttonhead-seat release fork
8. Release bearing race
9. Bolt GB5787 M6×12
10. Speedometer banking cover
11. Pin GB119 A10×20
12. Magnetic assembly
13. Bush-gear shifting mechanism
T11 Service Manual Transmission
119
1. Assembly
1) Disassembly of the outer race of front/rear
bearing of differential
2. Assembly
1) Installation of bush
Press the bush into its own position, shown in
the left figure, to ensure the air bleed out
passage doesn’t conform to the slit end.
Outer race
air bleed out passage
Slit end
T11 Service Manual Transmission
120
2) Installation of the outer race-output shaft
bearing
Install the outer race to place the side surface
with stamped model on the position shown in
the left figure.
1) Installation of the race-differential bearing
2) Installation of the oil seal-differential
Apply the transmission oil on the oil seal lip.
The specified oil: 75W-90
Gear
Outer ring
Side with stamped model
T11 Service Manual Transmission
121
3) Installation of the oil seal-input shaft
Apply the lubricating grease on the oil seal lip.
The specified lubricating grease
Mobilux Ep2 or equivalents
Inner ring
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст