Chery Tiggo T11 LHD. Manual — part 4
Chery T11 Service Manual
Body and Accessories
-14-
g. Loosen the tapping screw and fixing
bolts of the lower fender at left.
h. Prize up the right end board of the
instrument panel.
i.
Loosen the fixing nut of the right end
board.
j.
Remove the fender of Pole A.
k. Remove the instrument panel
Note: Install in the reversed sequence.
Torque:
Fixing bolts 7±1Nm
Chery T11 Service Manual
Body and Accessories
-15-
6. Dismantle the Regulator of Right Front Door
1) Dismantle the fender of right front door.
a. Prize up the protection cover of door
handle
b. Loosen the fixing screws
c. Unplug the wiring harness
d. Remove the shield inside the door
Plug
Fixing Screw
Fixing Point
Chery T11 Service Manual
Body and Accessories
-16-
2) Loosen the cable of inner handle, and
remove the protection film.
3) Dismantle the glass of door.
Loosen the fixing bolt for glass by socket
wrench.
4) Loosen the fixing bolts for regulator.
5) Remove the regulator.
6) Install in the reversed sequence.
Torque:
Fixing of door glass 11Nm
B1460612 (2 pcs)
Fixing of regulator 11Nm
B1840610 (6 pcs)
Note: Please refer to the removal procedure
of right front door for the disassembly of the
rest three doors.
Glass Fixing Bolt
Bolt
Chery T11 Service Manual
Body and Accessories
-17-
Ⅲ Seat
1. Left Front Seat
1) Move the seat to the furthest front end, and
remove the protection cover of guide rail.
2) Loosen the fixing bolts at the back end of
the guide rail.
3) Move seat to the furthest back end, and
remove the protection cover of guide rail.
4) Loosen the fixing bolts at the front end of
the guide rail.
5) Unplug seat heating element, and remove
the left front seat.
6) Install in the reversed sequence.
Torque:
Seat guide rail fixing 32Nm
PART NO: T11-68000 15(4 pcs)
Note: Please refer to the removal procedure
of left front door for the disassembly of the
right front seat.
Bolt
Pull Rod of Guide Rail
Fixing Point
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст