Chery Tiggo T11 LHD. Manual — part 7
Chery T11 Service Manual
Body and Accessories
-26-
7. Radiator Grille
1) Open the engine hood.
2) Loosen the fixing bolt of radiator grille.
3) Remove the radiator grille.
4) Install in the reversed sequence.
Torque:
Radiator grille fixing 6±1Nm
Q32005 (5 pcs)
Nut
Nut
Nut
Nut
Nut
Chery T11 Service Manual
Body and Accessories
-27-
Ⅴ
Removal and Installation of All Lamps
1. Tightening Specification of Fasteners for All Lamps
2. Specification of Bulbs
Type
Specification
Headlamp
12V 55W
Turning lamp, rear foglamp, reverse lamp
12V 21W
License plate, side turning and high-mounted stop lamp
12V 5W
Stop lamp
12V 21W
Position lamp
12V 5W
Front foglamp
12V 55W
Front/rear ceiling lamp
12V 8W
3. Removal and Installation of Headlamp
1) Open the engine hood.
2) Unplug the turning lamp.
Description
Specification
Headlamp fixing bolts
6±1Nm
Front fog lamp fixing bolts
2. 0±0. 2Nm
Taillamp fixing bolts
5±1Nm
Tapping screw of front ceiling lamp
2±0. 5Nm
Tapping screw of rear ceiling lamp
3±0. 5Nm
High-mounted stop lamp
3±0. 5Nm
Chery T11 Service Manual
Body and Accessories
-28-
3) Unplug the high/low beam headlamp.
4) Remove the three fixing bolts of headlamp
assembly.
5) Remove the headlamp assembly carefully.
6) Install in the reversed sequence.
Torque:
Headlamp fixing 6±1Nm
PART No.: T11-3772025 (3 pcs)
4. Replacement of Headlamp Bulbs
Replacing of bulbs for high beam and low
beam headlamp.
1) Remove the back cover of headlamp.
2) Remove the bulb clip.
3) Remove the bulbs for high beam and
dipped headlamp.
4) Remove the used bulbs, and replace them
with new bulbs.
Fixing point
Chery T11 Service Manual
Body and Accessories
-29-
5. Replacing the bulb for front turning lamp
1) Turn the bulb for front turning lamp
counterclockwisely to take it out from the
bulb seat.
2) Remove the bulb seat.
3) Repalce it with a new bulb.
4) Install the bulb seat to its original place.
6. Removal and Installation of Front Foglamp
1) Dismantle the front bumper.
a. Dismantle the fixing bolts under front
bumper.
b. Dismantle the side fixing bolts of
front bumper.
c. Dismantle the connecting bolts of
front wheel house at both sides.
Fixing bolt
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст