Chery QQ6 (S21) / S12LHD. Manual — part 140

7. Installation & Adjustment of Headlights

7.1. Installation Steps for the Headlights
The installation steps of headlights are reverse to those for removal.
7.2. Functions of Headlights
7.2.1. Front view
See right figure:
1

High beam light

2

Position light

3

Low beam light

4

Turn light

7.2.2. Back view
1

High beam light holder

2

High beam adjusting nut

3

Low beam light holder

4

Low beam adjusting nut

5

High beam, low beam, position and turning light plugs

6

Turning light holder

8.3. Adjustment of Headlights
8.3.1 Pay attention to law and regulations and verify the following
items before adjustment:

1). The tire air pressure should comply with the related
standard;
2). Vehicle is unloaded (except for spare tire and equiping
tools, and include driver’s weight for sedan);
3). The vehicle should be parked on level and smooth road or
field;
4). The matched mirror surface of the headlight should be fresh
of dirt;
5). The power supply should work normally and the bulb
should be properly installed.

8.3.2. Insert a cross head screwdriver into related adjusting hole to
adjust the light.

1

2 3

4

5

6

4

3

2

4

8. Installation & Adjustment of Front Fog
Lights

8.1. The installation of front light
The installation steps of front fog light are reverse to those for
removal.
8.2. The adjustment of the front fog lights
The front fog lights can be adjusted by turning the device with your
hand or a cross head screwdriver.

9. Installation of Tail Lights

9.1. Installation steps of the tail lights
The installation steps of tail lights are reverse to those for removal.
9.2. The functions of the tail lights
9.2.1. Front view
See right figure:
1). Left-rear turning light (21w)
2). Brake light (21w)
3). Position light (5-21w)
4). Rear Fog Light (21w)



See right figure:
1). Right-rear turning light (21w)
2). Brake light (21w)
3). Position light (5-21w)
4). Reverse indicator (21w)

3

4

1

2

1

2

3

Chapter VI Removal and Installtion of Vehicle Ceiling

1. Preparations

Tools: sleeve wrench, cross head screwdriver, flat head screwdriver

2. Notes

2.1. During the removal and installtion, make sure to apply proper
force and no violent operation is allowed.

2.2. During removal and installation of the inner decoration parts,
make sure to protect the decoration parts from being scratched.

3. Removal and Installation of Sun Visor

3.1. Removal Steps

3.1.1. Use a cross head screwdriver to loosen off the screws in the
sun visor on the left of the driver’s cab, and disassemble the sun
visor.
As shown in the figure:
Torque: 3±1Nm












3.1.2. The removal steps for the right sun visor are reverse to those
for removal of the left one.

3.2. Installation Steps

The installation steps are reverse to those for removal.

4. Removal and Installation of Vehicle-top
Armrest

4.1. Removal Steps

4.1.1. Open the ceiling armrest screw cover over the co-driver’s seat
by hand, and then use a cross head screwdriver to loosen off the left
and right fixing screws.
As shown in the figure:
Torque: 9±3Nm














4.1.2. Remove the ceiling armrest.











4.1.3. The removal of other ceiling armrests can follow the above
steps.

4.2. Installation Steps

The installation steps are reverse to those for removal.