Chery QQ6 (S21) / S12LHD. Manual — part 12
45
II. Disassembly/Reassembly and Maintenance of Rear Bumper
1. System Composition Diagram
2. Preparation
Tools: cross screwdriver, 7# sleeve.
3. Precautions
3.1. Please wear necessary labor protection supplies to avoid accidents.
3.2. To prevent scratch the bumper surface paint.
3.3. When the rear bumper is disassembled/reassembled in the low temperature environment, the
force applied can’t be big so as to avoid the breakage of the bumper.
Front/Rear Bumper
46
4. Removal Step
4.1. Open the luggage boot lid, and loosen two
fixing clips from the rear bumper with a cross
screwdriver. See right figure.
4.2. Loosen the fix screws and clips of rear
bumper and rear mud guard with a 7# sleeve.
Torque: 7N·m
4.3. Loosen the fix screws at the left side of
rear mud guard and rear bumper with a 7#
sleeve.
4.4. Loosen the fix screws at the right side of
rear mud guard and rear bumper with a 7#
sleeve.
4.5. Push out the fixing clips of rear bumper
from the rear mud guard by hand.
47
4.6 Pull out the bumper from the fixed
mounting at the fender by hand.
4.7. Take off rear bumper assy.
5. Installation Step
The installing steps are reverse to those for
removal.
48
Chapter 5 Disassembly/Reassembly and Maintenance of
Headlamp and Fog Lamp
1. System Composition Diagram
Lamp
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст