Chery QQ6 (S21) / S12LHD. Manual — part 15
57
4. Disassembly/Reassembly
of
Roof Hand-Hold
4.1. Removal Step
4.1.1. Remove the right/left fix screws with a
cross screwdriver.
Torque: 9±3Nm
4.1.2. Take off the hand-hold.
4.2. Installation Step
The installing steps are reverse to those for
removal.
4.3 Refer to Disassembly/Reassembly of Front
Right Hand-Hold for other hand-holds.
5. Disassembly/Reassembly
of
Front Ceiling Lamp
5.1. Removal Step
5.1.1. Remove the front ceiling lamp cover with
a flat head screwdriver.
Note: do not scratch part surface.
5.1.2. Loosen the front ceiling lamp fixing bolt.
Torque: 1.5±0.5Nm
58
5.1.3. Pull out the harness connector, and then
take off the front ceiling lamp assy.
5.2. Installation Step
The installing steps are reverse to those for
removal.
6. Disassembly/Reassembly of A
Pillar Trim
6.1. Removal Step
6.1.1. Prize A pillar protective board with a flat
head screwdriver.
6.1.2. Take off the A pillar trim.
6.2. Installation Step
The installing steps are reverse to those for
removal.
7. Disassembly/Reassembly of B
Pillar Trim
7.1. Removal Step
7.1.1 Remove B pillar lower protective board
(refer to Disassembly/Assembly of Seat Belt)
59
7.1.2. Remove the B pillar upper trim with a
flat head screwdriver.
Note: protect the trim part surface from
scratching.
7.2. Installation Step
The installing steps are reverse to those for
removal.
8. Disassembly/Reassembly of C
Pillar Trim
8.1. Removal Step
8.1.1. Refer to Disassembly/Reassembly of
Rear Passenger Seat and Seat Belt.
8.1.2. Remove the C pillar upper trim with a
flat head screwdriver.
8.1.3. Remove the C pillar lower trim with a
flat head screwdriver.
8.2. Installation Step
The installing steps are reverse to those for
removal.
9. Disassembly/Reassembly
of
Ceiling
9.1. Removal Step
9.1.1 Remove the left and right sun
visors.(Refer to Disassembly/Reassembly of
Sun Visor)
9.1.2. Remove the front ceiling lamp. (Refer to
Disassembly/Reassembly of Front Ceiling
Lamp)
9.1.3 Remove all the roof hand-hold.(Refer to
Disassembly/Reassembly of Roof Hand-Hold)
60
9.1.4. Remove the A/B/C pillar trim. (Refer to
Disassembly/Reassembly of A/B/C Pillart
Trim)
9.1.5. Remove the ceiling clips (5 pcs in total)
with a flat head screwdriver.
9.1.6. Remove the wheatherproof rubber strip
of four door opening by hand.
9.1.7. Open the trunk, and then remove the
ceiling. It is convenient to take off the ceiling
from the trunk and not easy to damage the
ceiling.
9.2. Installation Step
The installing steps are reverse to those for
removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст