Jaguar XJ (X350). Manual — part 65

.

The final tightening of the Upper arm retaining nut must be carried out with the vehicle

on its wheels.

Tighten to 47 Nm.

7 . Install the cowl vent screen access panel.

8

.

Install the air cleaner assembly. For additional information, refer to

<<303-12A>>

or

<<303-

12B>>

6 NOTE:

Upper Arm RH (60.35.42)

Removal

1 . Remove the air spring assembly.

<<204-05>>

2 . Remove the cowl vent screen access panel.

3 . Remove the upper arm rear retaining nut.

4 . Detach the engine compartment battery junction box.

5 . Detach the hydraulic control unit.

www.

6 . Remove the hydraulic control unit mounting bracket upper retaining bolt.

7 . Remove the hydraulic control unit mounting bracket retaining bolt.

8 . Detach the hydraulic control unit mounting bracket.

9 . Remove the upper arm front retaining nut.

10 . NOTE:

Note the position of the upper arm retaining bolt locating tangs to aid installation.

Remove the upper arm.

Installation

1

.

CAUTION: Make sure the upper arm retaining bolt locating tangs are correctly

located. Failure to follow this instruction may result in damage to the component.

Install the upper arm.

www.