Jaguar XJ (X350). Manual — part 66

2 . Install the upper arm front retaining nut.

3 . Install the upper arm rear retaining nut.

4 . Install the air spring assembly.

<<204-05>>

5

.

NOTE:

The final tightening of the Upper arm retaining nut must be carried out with the vehicle

on its wheels.

Tighten to 47 Nm.

6

.

NOTE:

The final tightening of the Upper arm retaining nut must be carried out with the vehicle

on its wheels.

Tighten to 47 Nm.

7 . Attach the hydraulic control unit mounting bracket.

8 . Install the hydraulic control unit mounting bracket retaining bolt.

9 . Install the hydraulic control unit mounting bracket upper retaining bolt.

www.

10 . Attach the hydraulic control unit.

1) Tighten to 9 Nm.

11 . Attach the engine compartment battery junction box.

12 . Install the cowl vent screen access panel.

Front Wheel Bearing and Wheel Hub
(60.25.03)

Removal

1

.

Remove the brake disc.

For additional information, refer to

Brake Disc - Vehicles With: Standard Brakes, VIN Range:

G00442->G45703 (70.10.10)

For additional information, refer to

Brake Disc - Vehicles With: Standard Brakes, VIN Range:

G45704->G99999 (70.10.10)

For additional information, refer to

Brake Disc - Vehicles With: High Performance Brakes, VIN

Range: G00442->G45703 (70.10.10)

For additional information, refer to

Brake Disc - Vehicles With: High Performance Brakes, VIN

Range: G45704->G99999 (70.10.10)

2 . Detach the front wheel speed sensor harness.

3 . Disconnect the front wheel speed sensor electrical connector.

4 . Remove the wheel bearing and wheel hub retaining bolts.

www.