Frelander 2. Manual — part 318
5.
6. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign material.
Be prepared to collect escaping fluids.
Make sure that all openings are sealed. Use new
blanking caps.
6.
7. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign material.
Be prepared to collect escaping fluids.
Make sure that all openings are sealed. Use new
blanking caps.
7.
Installation
1.
CAUTION: Make sure that the area around the component is
clean and free of foreign material.
To install, reverse the removal procedure.
1.
Electronic Engine Controls - TD4 2.2L Diesel - Oil Temperature Sensor
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the starter motor.
Refer to:
Starter Motor
(303-06B Starting System - TD4 2.2L Diesel,
Removal and Installation).
2.
3.
CAUTION: Make sure that a new sealing washer
is installed.
Torque: 27 Nm
3.
Installation
To install, reverse the removal procedure.
1.
Check and top-up the engine oil if required.
2.
Electronic Engine Controls - TD4 2.2L Diesel - Clutch Pedal Position (CPP)
SwitchLHD AWD
Removal and Installation
Removal
Disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the driver lower air bag.
Refer to:
Driver Lower Air Bag Module
(501-20B Supplemental
Restraint System, Removal and Installation).
2.
3.
Installation
To install, reverse the removal procedure.
1.
Electronic Engine Controls - TD4 2.2L Diesel - Clutch Pedal Position (CPP)
SwitchRHD AWD
Removal and Installation
Removal
Disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the driver lower air bag.
Refer to:
Driver Lower Air Bag Module
(501-20B Supplemental
Restraint System, Removal and Installation).
2.
3.
4.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст