Jeep Grand Cherokee WK. Manual — part 1614
CARPETS AND FLOOR MATS
REMOVAL
1. Remove the front seats, (Refer to 23 - BODY/SEATS/SEAT - REMOVAL).
2. Remove the rear passenger seat cushion, (Refer to 23 - BODY/SEATS/SEAT CUSHION - REMOVAL).
3. Remove the floor console, (Refer to 23 - BODY/INTERIOR/FLOOR CONSOLE - REMOVAL).
4. Remove the park assist module, the final drive control module, and the park assist / final drive control module
mounting bracket, (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/FINAL DRIVE CONTROL
MODULE - REMOVAL).
5. Remove the front door sill scuff plates, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE -
REMOVAL).
6. Remove the cowl trim panels, (Refer to 23 - BODY/INTERIOR/COWL TRIM - REMOVAL).
7. Remove the rear passenger door sill scuff plates, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE -
REMOVAL).
8. Remove the lower B-pillar trim panels, (Refer to 23 - BODY/INTERIOR/B-PILLAR LOWER TRIM - REMOVAL)
9. Remove the carpet from the vehicle.
INSTALLATION
1. Install the carpet in the vehicle.
2. Install the floor console, (Refer to 23 - BODY/INTERIOR/FLOOR CONSOLE - INSTALLATION).
3. Install the lower B-pillar trim panels, (Refer to 23 - BODY/INTERIOR/B-PILLAR LOWER TRIM - INSTALLATION).
4. Install the rear passenger door sill scuff plates, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE -
INSTALLATION).
5. Install the cowl trim panels, (Refer to 23 - BODY/INTERIOR/COWL TRIM - INSTALLATION).
6. Install the front door sill scuff plates, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE - INSTALLA-
TION).
7. Install the park assist / final drive control module mounting bracket, the park assist module, and the final drive
control module, (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/FINAL DRIVE CONTROL
MODULE - INSTALLATION).
8. Install the rear passenger seat cushion, (Refer to 23 - BODY/SEATS/SEAT CUSHION - INSTALLATION).
9. Install the front seats, (Refer to 23 - BODY/SEATS/SEAT - INSTALLATION).
23 - 114
INTERIOR
WK
COWL TRIM
REMOVAL
1. Remove the front door sill scuff plate, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE - REMOVAL).
2. Remove the hush panel from underneath the instrument panel.
3. Remove the nut that secures the cowl trim panel to the mounting bracket.
4. Remove the cowl trim panel.
INSTALLATION
1. Align the fastener hole in the cowl trim panel with the stud on the mounting bracket and then seat the trim panel
onto the mounting bracket.
WK
INTERIOR
23 - 115
2. Install the nut that secures the cowl trim panel to the mounting bracket.
3. Install the hush panel.
4. Install the front door sill scuff plate, (Refer to 23 - BODY/INTERIOR/DOOR SILL SCUFF PLATE -
INSTALLATION).
D-PILLAR TRIM
REMOVAL
1. Remove the upper liftgate trim panel, (Refer to 23 -
BODY/INTERIOR/LIFTGATE
OPENING
UPPER
TRIM - REMOVAL).
2. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the D-pillar trim panel
to the retaining clips in the D-pillar and remove the
trim panel.
23 - 116
INTERIOR
WK
INSTALLATION
1. Position the locating tabs on the bottom of the
D-pillar trim panel into the slots in the top of the
quarter trim panel.
2. Align the retaining tabs on the D-pillar trim panel
with the retaining clips in the D-pillar and engage
the retaining tabs that secure the trim panel to the
D-pillar.
3. Install the upper liftgate trim panel, (Refer to 23 -
BODY/INTERIOR/LIFTGATE
OPENING
UPPER
TRIM - INSTALLATION).
WK
INTERIOR
23 - 117
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст