Jeep Grand Cherokee WK. Manual — part 1615
DOOR SILL SCUFF PLATE
REMOVAL
1. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the door sill scuff plate to the
retaining clips in the door sill and remove the scuff plate.
INSTALLATION
1. Align the retaining tabs on the door sill scuff plate with the retaining clips in the door sill and engage the retaining
tabs that secure the scuff plate to the door sill.
23 - 118
INTERIOR
WK
FLOOR CONSOLE
REMOVAL
1. Using a trim stick C-4755 or equivalent, remove the
shifter bezel ring.
2. Using a trim stick C-4755 or equivalent, remove the
shifter bezel.
WK
INTERIOR
23 - 119
3. Remove the center console back cover (2) and dis-
connect the electrical connector (3).
4. Remove the screws (2) and remove the console
(1).
INSTALLATION
1. Position the console (1) into the vehicle and install
the screws (2).
23 - 120
INTERIOR
WK
2. Connect the electrical connector (3) and install the
rear cover (2) onto the console (1).
3. Position the shifter bezel and seat fully.
4. Position the shifter bezel trim ring and seat fully.
WK
INTERIOR
23 - 121
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст