Geely Emgrand X7. Manual part — 535
Geely Emgrand X7. Manual part - 535
5. Remove the fixing buckle for the
front fender lining plate trim
panel and the upper trim panel.
NL11-0263b
6. Dismantle the upper fixing bolts
of headlamp assembly.
NL11-0264b
7. Remove the side fixing screw for
the headlight assembly.
NL11-0265b
2139
8. Remove the fixing bolt on the
front of the headlight.
9. Dismantle
the
headlight
assembly.
NL11-0266b
10. Loose the bulb cover of
headlamp.
11. Disconnect the bulb connector of
headlamp.
12. Dismantle the headlamp bulb.
NL11-0267b
2140
Installation procedure:
Warning!
Refer to "warning on halogen bulb" in
"warnings and precautions".
1. Install the headlamp bulb.
Notes:
Avoid contacting the bulb or having it
get in contact with any wet item.
When the lamp is turned on, the skin
grease or moisture on the bulb may
cause the bulb explode. If the bulb
contact with any one of the above, use
alcohol or appropriate
Clean through degreaser and dry the
bulb.
2. Connect the headlamp bulb
connector.
3. Tighten the headlamp bulb cover.
NL11-0267b
4. When installing headlamp, pay
attention to align with limit hole
of headlamp.
NL11-0268b
2141
5. Install the upper fixing bolts of
headlamp.
Torque:8.8Nm(Metric)
6.5lb-ft(English system)
NL11-0269b
6. Install and tighten the side fixing
screw for the headlight.
Torque:8.8Nm(Metric)
6.5lb-ft(English system)
NL11-0265b
7. Install and tighten the front fixing
bolt for the headlight.
Torque: 8.8Nm (Metric) 6.5 lb-ft
(English system)
NL11-0266b
2142
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст