Geely Emgrand X7. Manual part — 126
Geely Emgrand X7. Manual part - 126
2.6.8.20 Piston Connecting Rod Components Disassembly, Assembly and Inspection
Note: Use the dedicated tools to carry out corresponding removal and installation.
Dismantlement Procedure
1. Dismantle the piston rod
components. Refer to 2.6.8.16
Replacement of Piston
Connecting Rod and Bearing.
2. Dismantle the first air ring.
FE02-0272b
3. Dismantle the second air ring.
FE02-0273b
4. Dismantle the oil ring’s upper
ring combination.
FE02-0274b
503
5. Dismantle the oil ring’s lower
ring combination.
FE02-0276b
6. Dismantle the lined ring.
FE02-0278b
7. With a special tool GL301-016,
remove the piston pin.
FE02-0275b
504
8. Disassemble connecting rod,
piston pin and piston are shown
in the graph.
FE02-0279b
Installation Procedure:
1. Install piston pin, connecting rod
and piston.
Note: During installation, make the
dot on the connecting rod bearing
cover facing towards the same
direction as the dot mark on the
piston.
FE02-0282b
2. Confirm normal movements
between the piston and rod
without any interference.
3. Inspect piston pin and connecting
rod clearance.
Standard Value
(
-0.016)~(-0.033)mm(Metric)
(-0.0006) ~ (-0.0012) in (English
system)
4. Inspect the piston and piston pin
clearance.
Standard Value
0.0011~0.0018 mm(Metric)
0.0004~-0.0007 in (English system)
FE02-0279b
505
5. Install the oil ring.
6. Install the oil ring’s lower ring
combination.
FE02-0284b
7. Install the oil ring’s upper ring
combination.
FE02-0285b
8. Install the second air ring.
Note: The side with marker should
face the piston top.
FE02-0283b
506
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст