Geely Emgrand X7. Manual part — 685
Geely Emgrand X7. Manual part - 685
7. Install and tighten the fixing bolt for the seat belt
fixing plate on the bottom of the center pillar.
Torque: 50Nm (Metric system) 37lb-ft (English
system)
NL12-0146b
2739
12.9.1.4 Indoor side seal strip and seal part replacement
Dismantlement Procedure
1. Dismantle front door frame sealing strip.
NL12-0152b
2. Dismantle rear door frame sealing strip.
NL12-0501b
3. Dismantle back door sealing strip.
NL12-0153b
2740
Installation Procedure:
1. Install front door frame sealing strip.
NL12-0154b
2. Install rear door frame sealing strip.
NL12-0502b
3. Install the back door seal.
NL12-0155b
2741
12.9.1.5 Rear post lower trim plate replacement
Dismantlement Procedure
Notes:
Please dismantle the rear pillar bottom trim panel
assembly with a special-purpose body repair tool,
otherwise this easily causes the trunk trim panel to be
damaged.
1. For dismantling of rear doorsill inner trimming
plate, refer to
2.9.1.1 Replacement of left/right
front doorsill inner trimming plate assembly
.
2. Lay down the last row seat, curl up floor rug, and
take out attached tool box.
NL12-0156b
3. Loosen 3 buckles on the side of upper trimming
plate of back door buckle.
4. Disengage 4 buckles on the upper side of the
upper trim panel for the back door lock catch.
5. Remove the upper trim panel of the lock catch of
the back door.
NL12-0157b
6. Remove the 3 fixing screws for the rear pillar
lower trim panel.
NL12-0158b
2742
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст