Geely Emgrand X7. Manual part — 668
Geely Emgrand X7. Manual part - 668
2. Fix inner opening handle cable.
3. Install the front door interior trim panel.
4. Connect the battery negative cable.
NL12-0097b
2671
12.5.2.5 Front door lock cylinder replacement
Dismantlement Procedure
Warning!
Warning: Refer to Warning on Battery Disconnection in Warnings and Precautions.
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Cable Disconnection/Connection
Procedures.
2. For dismantling of door inner trimming plate,
refer to
12.9.1.7 Replacement of left front door
inner trimming plate.
3. For dismantling of front door glass, refer to
11.4.8.5 Replacement of left front glass lifter
motor.
4. For dismantling of front door glass guide groove,
refer to
11.4.8.8 Replacement of front door glass
guide groove.
5. Remove the lock cylinder fixing bolt closure.
NL12-0099b
6. Remove the lock cylinder fixing bolt.
NL12-0100b
7. Dismantle the external door handle push rod.
NL12-0092b
2672
8. Loosen the fixing bolt for the external door
handle mounting lining seat.
NL12-0093b
9. Detach and push out the external door handle to
facilitate the dismantlement of the lock cylinder.
10. Draw out lock core.
NL12-0101b
Installation Procedure:
1. Remove and push out door outer opening handle
to facilitate installation of lock core.
2. Insert lock core into lock block.
NL12-0101b
2673
3. Tighten fixing bolts of mounting lining seat of
door outer opening handle.
Torque: 8Nm(Metric) 6lb-ft(English system)
NL12-0093b
4. Install door outer opening handle push rod.
NL12-0092b
5. Install the lock cylinder fixing bolt.
Torque :36Nm(Metric) 26 . 6lb-ft(English system)
NL12-0100b
2674
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст