Geely EC718, EC718RV, EC715, EC715RV. Manual part — 76
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 76
2.2.8.7 Intake Air Pressure and Temperature
Sensor Replacement
Removal Procedure:
FE02-0051b
1.
Disconnect the battery negative cable. Refer to
.
2.
Disconnect intake air pressure and temperature sensor
wiring harness connector.
3.
Remove the intake manifold assembly. Refer to
Intake Manifold Assembly Replacement
.
FE02-0052b
4.
Remove the sensor retaining bolts.
FE02-0053b
5.
Pull out the intake air pressure and temperature sensor.
Engine
Control System JL4G18-D
2-219
Installation Procedure:
FE02-0054b
1.
Clean the intake air pressure and temperature sensor
installation position and apply new seals.
Note
The seal is single used only. After removal, a new
seal must be installed.
FE02-0055b
2.
Install the sensor retaining bolt.
Torque: 9 Nm (Metric) 6.66 lb-ft (US English)
FE02-0051b
3.
Install the intake manifold assembly.
4.
Connect the intake air pressure and temperature sensors
wiring harness connector.
5.
Connect the battery negative cable.
2-220
Control System JL4G18-D
Engine
2.2.8.8 Engine Control Module Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices"
FE02-0065b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the glove box. Refer to
3.
Disconnect the engine control module wiring harness
connector.
4.
Remove the engine control module retaining bolts.
Installation Procedure:
FE02-0065b
1.
Install the engine control module retaining bolts.
Torque: 9 Nm (Metric) 6.66 lb-ft (US English)
2.
Connect the engine control module wiring harness
connector.
3.
Install the glove box.
4.
Connect the battery negative cable.
Engine
Control System JL4G18-D
2-221
2.3 Fuel System JL4G18-D
2.3.1 Specifications
2.3.1.1 Fastener Tightening Specifications
Applications
Model
Specifications
Metric (Nm)
US English (lb-ft)
Fuel Tank Retaining Bolt
M10 × 1.25 × 30
38-46
28.2-34.0
Fuel Filter Mounting Bracket
Retaining Bolt
M6 × 16
8-10
6.0-7.4
Fuel Pipe Retaining Bolts
M8 × 15
20-24
14.8-17.8
M8 × 20
20-24
14.8-17.8
Fuel Rail Retaining Bolt
M6 × 20
8-10
6.0-7.4
2-222
Fuel System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст