Geely EC718, EC718RV, EC715, EC715RV. Manual part — 347
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 347
Installation Procedure:
FE08-0027b
1.
Install the blower speed control module and tighten the
retaining screws.
Torque: 3 Nm (Metric) 2.2 lb-ft (US English)
2.
Connect the blower speed module harness connector.
8.2.8.9 Blower Motor Replacement
Removal Procedure
1
2
2
2
FE08-0028b
1.
Disconnect the battery negative cable. Refer to
2.
Disconnect the blower motor harness connector (1).
3.
Remove the blower motor retaining screws (2) and
remove the blower motor.
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-59
Installation Procedure:
FE08-0029b
1.
Install the blower motor and tighten the retaining screws.
Torque: 3 Nm (Metric) 2.2 lb-ft (US English)
2.
Connect the blower motor harness connector.
8.2.8.10 Warm and Cold Air Adjust Motor and
Inside and Outside Circulation Motor
Replacement
Removal Procedure
FE08-0041b
1.
Remove the air-conditioning assembly. Refer to
Air-conditioning Assembly Replacement
2.
Separate the radiator and the blower assembly.
3.
Remove the warm air and cold air adjust motor retaining
screws.
8-60
Automatic Air-conditioning
Heating, Ventilation and A/C System
Installation Procedure:
FE08-0042b
1.
Install the warm air and cold air adjust motor retaining
screws
Torque: 3 Nm (Metric) 2.2 lb-ft (US English)
2.
Assemble the radiator and the blower assembly.
3.
Install the air-conditioning assembly.
Note
Inside and Outside Circulation Motor Replacement
is the same as that of Warm and Cold Air Adjust
Motor.
8.2.8.11
Instrument
Panel
Air
Duct
Replacement
Center Air Duct Replacement
Removal Procedure
Note
Please use special tools to remove interior panels,
otherwise panels will be easily scratched.
FE08-0043b
1.
Remove
the
instrument
panel.
Refer
to
Instrument Cluster Replacement
2.
Remove the center air duct panel.
3.
Remove the center air duct.
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-61
Installation Procedure:
FE08-0044b
1.
Install the center air duct.
2.
Install the center air duct panel.
3.
Install the instrument panel.
Instrument Panel Side Air Duct Replacement
Removal Procedure
FE08-0045b
1.
Removal the instrument panel side panel.
2.
Remove the air duct retaining screw.
3.
Use a special tool to remove the side air duct.
Installation Procedure:
1.
Press the side air duct into place.
Note
Both side air ducts replacement is the same.
2.
Install the air duct retaining screw.
3.
Install the instrument panel side panel.
8-62
Automatic Air-conditioning
Heating, Ventilation and A/C System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст