Mazda 6. Manual — part 299
S–90
TRIM
FRONT DOOR TRIM REMOVAL/INSTALLATION
A6E774468420W01
1. Disconnect the negative battery cable.
2. Open the cap using a small screwdriver, then
remove the screw.
3. Remove the inner handle cover.
4. Remove the inner garnish.
5. Remove the cover, then remove screw A.
6. Remove the lens cover, then remove screw B.
7. Disengage clips A from the front door using a
fastener remover.
8. Pull the front door trim upward, then disengage
hooks B from the front door.
9. Disconnect the power door mirror switch
connector and the power window main switch
connector (driver’s side) or power window
subswitch connector (passenger’s side).
10. Remove the courtesy light.
11. Remove the front door trim.
12. Remove the switch panel from the front door trim.
13. Install in the reverse order of removal.
End Of Sie
REAR DOOR TRIM REMOVAL/INSTALLATION
A6E774468520W01
1. Disconnect the negative battery cable if equipped with power window system.
2. Remove the regulator handle if equipped.
3. Open the cap using a small screwdriver, then
remove the screw.
4. Remove the inner handle cover.
5. Remove the cover, then remove screw.
6. Disengage clips A from the rear door using a
fastener remover.
A6E7744W009
A6E7744W010
A6E7744W009
TRIM
S–91
S
7. Pull the rear door trim upward, then disengage
hooks B from the rear door.
8. Disconnect the power window subswitch
connector if equipped.
9. Remove the rear door trim.
10. Remove the switch panel from the rear door trim.
11. Install in the reverse order of removal.
End Of Sie
TIRE HOUSE TRIM REMOVAL/INSTALLATION
A6E774468760W01
4SD
1. Remove the rear scuff plate.
2. Remove the rear seat side.
3. Remove the fastener.
4. Pull the tire house trim upward, then disengage
clips A from the body, and remove the tire house
trim.
5. Install in the reverse order of removal.
5HB
1. Remove the rear scuff plate.
2. Pull the tire house trim toward you, then
disengage clip B from the body and clip A, hooks
C, D from the trunk side trim.
3. Remove the tire house trim.
4. Install in the reverse order of removal.
End Of Sie
A6E7744W011
A6E7744W015
A6E7744W016
S–92
TRIM
REAR PACKAGE TRIM REMOVAL/INSTALLATION
A6E774468320W01
1. Remove the high-mount brake light.
2. Fold the rear seat back.
3. Remove the fasteners.
4. Pull the rear package trim upward, then
disengage the clips from the body.
5. Disengage the hooks, then remove the rear
package trim.
6. Install in the reverse order of removal.
End Of Sie
TRUNK SIDE TRIM REMOVAL/INSTALLATION
A6E774468860W01
4SD
1. Remove the trunk end trim.
2. Remove the fasteners, then remove the trunk side
trim.
3. Install in the reverse order of removal.
5HB
1. Remove the trunk end trim.
2. Remove the trunk side upper trim.
3. Remove the cargo hooks.
4. Remove the fasteners.
5. Pull the trunk side trim toward you, then
disengage clips A from the body.
6. Install in the reverse order of removal.
End Of Sie
A6E7744W026
A6E7744W007
A6E7744W008
TRIM
S–93
S
TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION
A6E774468860W02
1. Disconnect the negative battery cable. (LH only)
2. Remove the tire house trim.
3. Remove the rear seat remote lever.
4. Remove the screw.
5. Pull the trunk side upper trim toward you, then
disengage clips A from the body.
6. Disconnect the cargo compartment light
connector. (LH only)
7. Install in the reverse order of removal.
End Of Sie
TRUNK LID TRIM REMOVAL/INSTALLATION
A6E774458800W01
1. Pull the handle toward you, then remove the
handle.
2. Remove the fasteners, then remove the trunk lid
trim.
3. Install in the reverse order of removal.
End Of Sie
TRUNK END TRIM REMOVAL/INSTALLATION
A6E774468890W01
4SD
1. Remove the fasteners.
2. Pull the trunk end trim upward, then disengage
clips A, pins B, and hooks.
3. Remove the trunk end trim.
4. Install in the reverse order of removal.
A6E7744W006
A6E7744W005
A6E7744W012
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст