Mazda 6. Manual — part 298
DASHBOARD AND CONSOLE
S–86–1
S
S–86BODY
CONSOLE DISASSEMBLY/ASSEMBLY
A6E774264270W02
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
End Of Sie
DASHBOARD AND CONSOLE
1
Console lid (only large console box)
2
Box
3
Rear ashtray case
4
Bracket
5
Console
6
Console cover
7
Box storage
8
Lock No.1
9
Inner console lid
10
Lid core
11
Lock No.2
12
Hinge
13
Outer console lid
14
Front ashtray
15
Boot
16
Boot panel
17
Cup holder
18
Cup holder panel
A6E7742W001
TRIM
S–87
S
SBODY
A-PILLAR TRIM REMOVAL
A6E774468160W01
1. Turn the seaming welt over.
2. Disengage clips A using a fastener remover.
3. Pull the A-pillar trim, then disengage clip B (1).
4. Pull the A-pillar trim upward, then disengage clip
B from the A-pillar trim (2).
5. Pull clip B out, then rotate 45
° .
6. Remove clip B from the grommet by pulling it
toward you.
End Of Sie
A-PILLAR TRIM INSTALLATION
A6E774468160W02
1. Cut A-pillar trim tab A to the same length as tab B.
2. Install clip B to the A-pillar trim.
3. Install the A-pillar trim by tapping the clip into the
body.
End Of Sie
TRIM
A6E7744W023
A6E7744W024
A6E7744W022
S–88
TRIM
B-PILLAR LOWER TRIM REMOVAL/INSTALLATION
A6E774468220W01
1. Remove the front scuff plate.
2. Remove the rear scuff plate.
3. Pull the area marked A, then remove one side of
the B-pillar lower trim.
4. Pull the B-pillar lower trim, then remove the pin
from the body.
5. Remove the B-pillar lower trim.
6. Install in the reverse order of removal.
End Of Sie
B-PILLAR UPPER TRIM REMOVAL/INSTALLATION
A6E774468210W01
1. Remove the upper anchor of the front seat belt.
2. Remove the B-pillar lower trim.
3. Turn the seaming welt over.
4. Pull the B-pillar upper trim toward you, then
disengage, clip B, and pin C from the body.
5. Disengage hook A from the body, then remove B-
pillar upper trim.
6. Install in the reverse order of removal.
End Of Sie
FRONT SIDE TRIM REMOVAL/INSTALLATION
A6E774468370W01
1. Remove the front scuff plate.
2. Turn the seaming welt over.
3. Pull the front side trim toward you, then
disengage clip A and the stud bolt, then remove
the front side trim.
4. Install in the reverse order of removal.
End Of Sie
A6E7744W021
A6E7744W025
A6E7744W014
TRIM
S–89
S
FRONT SCUFF PLATE REMOVAL/INSTALLATION
A6E774468710W01
1. Pull the front scuff plate upward, then disengage
clips B, pins C, D and hooks E from the body, and
remove the front scuff plate.
2. Install in the reverse order of removal.
End Of Sie
REAR SCUFF PLATE REMOVAL/INSTALLATION
A6E774468730W01
1. Pull the rear scuff plate upward, then disengage
clips A, pin B, and hooks C from the body, and
remove the rear scuff plate.
2. Install in the reverse order of removal.
End Of Sie
C-PILLAR TRIM REMOVAL/INSTALLATION
A6E774468240W01
4SD
1. Remove the tire house trim.
2. Turn the seaming welt over.
3. Remove the cap using a fastener remover, and
remove the bolt (with curtain air bag system).
4. Disengage clips A and clip B using a fastener
remover.
5. Pull the C-pillar trim forward, then disengage
hook C from the body, and remove the C-pillar
trim.
6. Install in the reverse order of removal.
5HB
1. Remove the tire house trim.
2. Remove the trunk side upper trim
3. Turn the seaming welt over.
4. Remove the cap using a fastener remover the
bolt. (with curtain air bag system)
5. Disengage clips A and pin B using a fastener
remover.
6. Pull the C-pillar trim forward, then disengage the
hook from the body.
7. Remove the rear center seat belt tongue from the
C-pillar trim. (LH only)
8. Remove the C-pillar trim.
9. Install in the reverse order of removal.
End Of Sie
A6E7744W017
A6E7744W018
A6E7744W019
A6E7744W020
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст