Acura RSX Honda Integra. Manual — part 389
01
02
03
S6M6AZHJ18513415017KBAT00
Special Tools Required
Speed nut removal
’05-06 Models
20-93
Front Bumper Lower Grille Replacement
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
C
B
D
A
B
Fastener Locations
: Bolt, 1
A
: Bolt, 2
B
Fastener Locations
: Screw, 4
B
: Speed nut, 3
C
A
D
B
C
C
C
B
B
B
E
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.
• Take care not to scratch the front bumper.
1. Remove the front bumper (see page 20-91).
2. Remove the license plate.
3. Remove the bolts (A, B), then remove the license
plate base (C) from the front bumper (D).
4. From the back of the front bumper (A), remove the
screws (B), and release the speed nuts (C) securing
the front bumper lower grille (D) by using pliers (E)
as shown.
(cont’d)
05/06/27 18:24:29 61S6M040_200_0094
04
01
S6M6AZHJ18513415031KBAT00
Special Tools Required
’05-06 Models
20-94
20-94
Bumpers
Front Bumper Lower Grille
Replacement (cont’d)
Front Bumper Side Cover
Replacement
D
A
B
C
C
C
A
A
B
C
D
5. Detach the hooks (A) on the bottom of the front
bumper lower grille (B), and pull out the grille to
release it from the pins (C) of the front bumper (D),
then remove the grille.
6. Install the grille in the reverse order of removal,
and note these items:
• Push the hooks into place securely.
• Release the speed nuts with new ones.
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.
• Take care not to scratch the front bumper.
1. Remove the front bumper (see page 20-91).
2. From the back of the front bumper (A), release the
hooks (B), and pull out the front bumper side cover
(C) to release the hook (D), then remove the cover.
3. Install the cover in the reverse order of removal,
and push the hooks into place securely.
05/06/27 18:24:30 61S6M040_200_0095
01
S6M6AZFJ18513415012KDAT00
’02-04 Models
20-95
Rear Bumper Removal/Installation
REAR BUMPER
A
Fastener Locations
: Screw, 2
A
: Screw, 4
B
C
: Clip, 2
HOOKS
(Five places)
HOOKS
(Five places)
UPPER BEAM
REAR LICENSE LIGHT
CONNECTOR
ABSORBER
REAR FENDER COVER
SIDE SPACER
B
B
B
B
A
C
C
NOTE:
• Have an assistant help you when removing and installing the rear bumper.
• Take care not to scratch the rear bumper and body.
• Put on gloves to protect your hands.
1. Remove the rear bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
• Make sure the rear license light connector is plugged in properly.
• Make sure the rear bumper engages the hooks of the side spacers and upper beams on both sides securely.
• Replace any damaged or stress-whitened clips.
• Push the clips into place securely.
05/06/27 18:24:30 61S6M040_200_0096
01
S6M6AZHJ18513415012KDAT00
’05-06 Models
20-96
Bumpers
Rear Bumper Removal/Installation (cont’d)
REAR BUMPER
A
Fastener Locations
: Screw, 2
A
: Screw, 4
B
C
: Clip, 2
HOOKS
(Five places)
HOOKS
(Five places)
UPPER BEAM
REAR LICENSE LIGHT
CONNECTOR
ABSORBER
REAR FENDER COVER
SIDE SPACER
B
B
B
B
A
C
C
NOTE:
• Have an assistant help you when removing and installing the rear bumper.
• Take care not to scratch the rear bumper and body.
• Put on gloves to protect your hands.
1. Remove the rear bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
• Make sure the rear license light connector is plugged in properly.
• Make sure the rear bumper engages the hooks of the side spacers and upper beams on both sides securely.
• Replace any damaged or stress-whitenings clips.
• Push the clips into place securely.
05/06/27 18:24:30 61S6M040_200_0097
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст