Acura RSX Honda Integra. Manual — part 388
01
02
03
01
S6M6A00J46166453502KBAT00
20-89
Rear Seat Cushion Cover Replacement
Fastener Locations
: Clip, 2
A
B
B
A
A
B
A
B
1. Remove the rear seat-cushion (see page 20-85).
2. Pull up the front edge of the seat cushion center
tray (A) to release the clips, and release the hooks
(B), then remove the tray. If necessary, remove the
clips from the tray.
3. Release all the clips (A) from under the seat
cushion, and fold back the seat cushion cover (B).
4. Pull back the edge of the seat cushion cover (A) all
the way around, and release the clips (B), then
remove the seat cushion cover.
5. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles, make sure the material is
stretched evenly over the pad before securing
the clips.
• Replace any clips (A) you removed with new
ones. Install them with commercially available
upholstery ring pliers (B).
05/06/27 18:24:28 61S6M040_200_0090
01
S6M6AZFJ18513415011KDAT00
’02-04 Models
20-90
Bumpers
Front Bumper Removal/Installation
ABSORBER
HOOKS
(Three places)
SIDE SPACER
UPPER BEAM
FRONT AIR SPOILER
FRONT INNER
FENDER
D
B
A
HOOKS
(Three places)
D
A
B
B
C
C
C
C
C
C
C
C
C
FRONT BUMPER
C
Fastener Locations
: Screw, 2
A
: Screw, 4
B
: Clip, 2
C
: Clip, 10
D
B
NOTE:
• Have an assistant help you when removing and installing the front bumper.
• Take care not to scratch the front bumper and body.
• Put on gloves to protect your hands.
1. Remove the front bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
• Make sure the front bumper engages the hooks of the side spacers and upper beams on both sides securely.
• Replace any damaged or stress-whitenings clips.
• Push the clips into place securely.
05/06/27 18:24:28 61S6M040_200_0091
01
S6M6AZHJ18513415011KDAT00
’05-06 Models
20-91
ABSORBER
HOOKS
(Three places)
SIDE SPACER
UPPER BEAM
FRONT INNER
FENDER
D
B
A
HOOKS
(Three places)
D
A
B
C
C
C
C
C
C
C
C
B
C
FRONT BUMPER
C
Fastener Locations
: Screw, 2
A
: Screw, 4
B
: Clip, 2
C
: Clip, 10
D
B
NOTE:
• Have an assistant help you when removing and installing the front bumper.
• Take care not to scratch the front bumper and body.
• Put on gloves to protect your hands.
1. Remove the front bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
• Make sure the front bumper engages the hooks of the side spacers and upper beams on both sides securely.
• Replace any damaged or stress-whitened clips.
• Push the clips into place securely.
05/06/27 18:24:28 61S6M040_200_0092
01
S6M6AZFJ18513415045KBAT10
’02-04 Models
20-92
Bumpers
Front Bumper Spoiler Replacement
FRONT BUMPER SPOILER
FRONT INNER
FENDER
B
Fastener Locations
: Bolt, 2
A
: Clip, 2
B
C
: Clip, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
HOOKS
(Six places)
C
A
A
B
C
NOTE: Take care not to scratch the front bumper.
1. Remove the front bumper spoiler as shown.
2. Install the spoiler in the reverse order of removal, and note these items:
• Replace any damaged or stress-whitenings clips.
• Push the clips and hooks into place securely.
05/06/27 18:24:29 61S6M040_200_0093
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст