Mitsubishi Outlander (2003+). Manual — part 316
DOOR
BODY
42-39
DOUBLE-SIDED TAPE POSITION
AC103492 AD
A
A
B
B
a
b
Section A – A
Section B – B
Adhesive tape: Double-sided tape
a: 7 mm width, 100 mm length and 0.8 mm thickness,
b: 7 mm width, 130 mm length and 0.8 mm thickness
Door outer opening
weatherstrip
Clip hole
Clip hole
Door outer opening
weatherstrip
Door outer opening
weatherstrip
DOOR
BODY
42-40
AC103491AC
Sealant: 3M ATD Part No. 8633
or equivalent
2
Section A – A
7
Door
: Sectional view
of clip position
3
4
6
7
A
A
1
5
2
<Rear door>
Note
: The convex position of the door
N
8
Waterproof film removal steps
•
Door trim assembly (Refer to GROUP
52A, Door Trim
1. Pull handle bracket
2. Waterproof film
Door inner opening weatherstrip
removal steps
•
Rear seat (Refer to GROUP 52A,
Trims
).
•
Scuff plate (Refer to GROUP 52A,
Trims
).
3. Door inner opening weatherstrip
(body side)
Door outer opening weatherstrip
removal steps
•
Rear door check mounting bolt (body
side) (Refer to
).
<<A>> >>C<<
4. Door outer opening weatherstrip
Door beltline inner weatherstrip
removal steps
•
Door trim assembly (Refer to GROUP
52A, Door Trim
5. Door beltline inner weatherstrip
Door window glass runchannel
removal steps
•
Door trim assembly (Refer to GROUP
52A, Door Trim
1. Pull handle bracket
2. Waterproof film
5. Door beltline inner weatherstrip
6. Door window glass runchannel
Door beltline moulding removal
7. Door beltline moulding
Door tape removal steps
•
Door trim assembly (Refer to GROUP
52A, Door Trim
>>A<<
8. Door tape
DOOR
BODY
42-41
DOUBLE-SIDED TAPE POSITION
REMOVAL SERVICE POINT
<<A>> DOOR OUTER OPENING WEATHERSTRIP
REMOVAL
Make a fabricated tool as shown in the illustration to
remove the door weatherstrip.
AC103128AD
A
A
B
B
a
b
7 mm
20 mm
C
C
c
d
Adhesive tape: Double-sided tape
a, d: 7 mm width and 0.8 mm thickness,
b: 7 mm width, 110 mm length and 0.8 mm thickness,
c: 7 mm width, 62 mm length and 0.8 mm thickness
Section A – A
Section B – B
Section C – C
Clip hole
Clip hole
Clip hole
Door outer opening
weatherstrip
Door outer opening
weatherstrip
Clip hole
Door outer opening
weatherstrip
Door outer opening
weatherstrip
ACX00555
15 mm
8 mm
AB
4 mm
Thickness:
1 mm
Fabricated
tool
DOOR
BODY
42-42
INSTALLATION SERVICE POINTS
>>A<< DOOR TAPE <REAR DOOR>
INSTALLATION
Apply the door tape in the location shown in the
Figure of the instructions.
>>B<< DOOR WINDOW GLASS RUNCHANNEL
<FRONT DOOR> INSTALLATION
Assemble the run channel cut-out area with the
thumb of the door mirror.
>>C<< DOOR OUTER OPENING WEATHERSTRIP
INSTALLATION
The clip colour identifies the left and right
weatherstrips so be sure to see the colours so as to
install correctly.
AC106848
AB
Section A – A
A
A
Door tape
Door tape
Door panel
Adjust the end of the
door tape to the corner
end of the door panel.
APPLICABLE SIDE
IDENTIFICATION
COLOUR
Left door
Natural (White)
Right door
Pink
AC103753
Section A – A
A
A
Notch
Door mirror
claw position
Door panel
Runchannel
Door mirror
Door mirror
claw position
Runchannel
AC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст